µCAN.1.ti-TRS
TRS
Description
The cable transmitter µCAN.1.ti-TRS is designed for the acquisition of one temperature signal and its digitization for being processed via CAN bus. The TRS module is integrated directly in the measurement line at a short distance from the source to avoid interference effectively.Temperature Thermo type J, K, L Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo) Accuracy ± 0.2 K (Pt100) Resolution 16-bit (0.1 °C) Sampling rate up to 1 kHz Sensor error detection Equipped with cold-junction compensation Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939
- Electronic data processing - microcomputers
- Voltage Microcontrol
- Microcontrol Advisory
Manufacturer/ Producer
53844 Troisdorf - Germany
Similar products from MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor.Strain gauge full bridge Voltage ± 20 mV Supply voltage 4.5 V Accuracy 0.2% (FS) Resolution 16-bit (1 µV) Sampling rate up to 1kHz Supply of the strain gauge full bridge Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.Voltage ± 10 V Current 0 mA … 20 mA Accuracy 0.01% (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate up to 1 kHz Sensor supply Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939
