ARAL MULTI-PURPOSE GREASE 18 KG

Lithium saponified EP grease with added molybdenum sulfide (MoS 2) Description Aral multi-purpose grease F is a lithium saponified EP grease with added molybdenum disulfite (MoS 2). The addition of MoS 2 results in friction-improving and emergency running properties. Aral multi-purpose grease F has good flexing resistance and very good pressure absorption, aging and corrosion protection properties. Application Aral multi-purpose grease F can be used in highly stressed pin joints, journal bearings, on fifth wheel plates on commercial vehicles, in water or dirt-polluted environments such as in the steel or mining sector, on open sprockets in transmissions or construction machinery.Specifications DIN - 51502 KPF2K-30

Universal grease Description Lithium-saponified universal grease based on high-quality mineral oils with selected ingredients. Has anti-wear, anti-aging and anti-corrosion components Universal lubricant/grease for a wide range of applications , among others. in the passenger car sector with approval from the automotive industry specifications MB-Approval 267.0 DIN - 51502 K2K-30

Standard multi-purpose grease based on lithium soap for rolling and plain bearings. Specification releases: K 2 K-30

High Temperature Grease (05/20/2021) High temperature multi-purpose grease Description Castrol High Temperature Grease is a high-performance lithium complex grease that is characterized by its excellent high-pressure properties. It contains a high-quality base oil based on mineral oil, to which corrosion protection inhibitors and antioxidants are added in a balanced ratio. The high resilience and good wear protection of Castrol High Temperature Grease goes far beyond the standard of conventional lubricating greases. These good properties result from the effectiveness of the innovative additive package developed specifically for Castrol High Temperature Grease . By smoothing the surface roughness on the friction surfaces , their load share increases . This creates increased safety with regard to the load capacity of the bearings with reduced friction.