Our Breeze technology has many enormous advantages over the previous classic lubrication applications. Discover enormous savings potential for mass production when using our LSJ Mini in your process. This system can be used optimally in the event of always consistent tool operations. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter
Germany
Precise Fogless spray lubrication even with highviscosity lubricants. Powerful pumps and sophisticated accessories make almost any lube application possible.
Request for a quoteGermany
Aral SuperTurboral 5W-30 is a low-friction engine oil for use in almost all commercial vehicles that do not require a so-called "low SAPS oil". It enables significantly extended oil change intervals and offers significant fuel saving potential compared to conventional multi-grade engine oils. The excellent low-temperature properties and optimal wear protection, even under severe operating conditions, offer a wide range of applications. Advantages -Extended oil change intervals and thus reduction in operating costs -Excellent soot-carrying capacity reduces abrasive wear in the engine -Best engine cleanliness thanks to low deposits and an optimized detergent system -All-year-round savings potential with quick oiling thanks to synthetic base oils with excellent flow behavior -Optimized wear protection Specifications ACEA E4, E7 MB approval 228.5
Request for a quoteGermany
Water-based special release agents in various concentrations for low volume spray application Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • castings are particularly suitable for the "bonding and welding" joining processes • products can be further diluted • effective reduction of "metallization" (metal-to-metal bonding) • exceptional release effect with good lubrication of ejectors and slides
Request for a quoteTurkey
"With the help of our rich machine park and well-experienced engineers, we can answer your custom design machine part needs. Please don't hesitate to ask for the price."
Request for a quoteCreate one request and get multiple quotes form verified suppliers.