FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.
Germany
FXL-RR magnetic chucks are especially suitable for the rotationally symmetrical machining of rings, sleeves and flanges. The radial pole pitch ensures uniform clamping over the entire contact area and additional mechanical positioning and clamping aids can be inserted into the T-slots in the poles. The T-slots provide the further option of also using mobile or fixed pole extensions to free the workpiece or to clamp it without pull-down.
Request for a quoteGermany
FXL magnetic chucks with pole type 70 are used to securely clamp workpieces from approx. 150x150mm with material thickness from approx. 15mm. Poles of size 70x70mm generate a magnetic field that penetrates approx. 18mm into the workpiece, which is why they are particularly suitable for larger workpieces. Very good air gap behavior also allows uneven workpieces to be clamped securely. In addition, pole extensions with a larger stroke can be used on 70 poles for height compensation. The nominal holding force is a super strong 160 N/cm2 = 7.8kN per pole.
Request for a quoteGermany
FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.
Request for a quoteGermany
FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.
Request for a quote