These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.
France
Rods for ball bushings and plain bearings Ø10, 12, 16, 20, 25, 30 et 40 mm Guide rods with tapping at both ends (except stainless steel just 1 side) 4 matters hardened steel, chromed steel, stainless steel 304L, hardened stainless steel Several lenghts and special length on request.
Request for a quoteFrance
These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks
Request for a quoteFrance
Manual positioning table drived by lead screw Guided by 2 rods on bronze bearings or ball bushings Precision manual tables The guidance is ensured by 2 rods on 4 calibrated bronze bearings (reduced play) or 4 ball bushings for guidance without play. The guide length of long body tables (309L/M) allows to accept large loads and torques. The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking. Manual crossed tables XY or YZ For the creation of XY crossed table, the tables are mounted one on the other directly by the body (long body version only) with the option 308922 * making smooth holes in the body of a table. To combine 2 tables in YZ, it is preferable to use a lifting table for the Z axis, mounted by its end on the body of the horizontal table.
Request for a quoteFrance
Economical manual positioning table drived by leadscrew. Actuated by grip knob. Guided by 2 rods on bronze bearings. Using of economical manual tables Acting is done by a grip knob supplied with the table. Maxi stroke is 100 mm for size 0, and 200 mm for sizes 1 and 2. Any nonstandard intermediate stroke can be produced. The locking in position is done on the trapezoidal screw, either in position B1 (above the front plate) or in position B2 (at the end of the end plate) depending on the access and the space available. The position is visualized by a mechanical indicator or by ruler on the base plate. The fixing on the frame is done by the 2 end plates (laminated holes) or by the end plate in « Z axis » version for vertical applications. The positioning accuracy of economical manual tables The axial positioning accuracy of these tables is <0.20 mm (in practice 0.05 to 0.15 mm), because the axial play is largely eliminated after locking in position
Request for a quote