The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.
Germany
FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.
Request for a quoteTurkey
Our magnet control rectifier product is produced as 220 VDC or 120 VDC for magnet lift devices. Application powers vary between 3 kW and 60 kW. The magnet control rectifier can be easily operated by the user with the remote control Start-Stop remote control, and lifting and dropping operations are performed safely. In addition, the inductive energy released during closing (demagnetism) is eliminated by a special damping snubber circuit, ensuring smooth operation of the on-off contactor. Magnetism and Demagnetism are done with automation-controlled control on the rectifier panel, On-Off and Reverse-Direct voltage application technique. In addition, due to the buffer charging feature of the rectifier, the battery group can be connected to the desired Ah capacity, ensuring healthy charging and at the same time ensuring uninterrupted safe operation of the iron lifting magnet in case of power outages. Iron removal rectifier (magnet rectifiers), special type input and output upon request.
Request for a quotePortugal
Digital electromagnetic pump, for proportional dosing. PVDF head and PTFE diaphragm and ceramic balls.
Request for a quoteFrance
Electromagnets 200, 500 and 950 kg with permanent magnet for cold loads Self-contained battery model. Operating Modes: Manual: Simple use with buttons to activate or deactivate magnetization. Automatic: Quick activation and deactivation of magnet without manual order, ideal for hard-to-reach areas (no need to control with pendant button to take or release the load). Flexibility: Equipped with 3 power levels, they allow for sheet metal depiling. Benefits: Since it is a permanent magnet electromagnet, the battery is only used during demagnetizations, which gives it a long autonomy. There is no risk that the load falls because it is an electromagnet with permanent magnet. They are equipped with a force sensor that prevents the release of the load if the load is not put on the ground (which naturally prevents dropping).
Request for a quoteCreate one request and get multiple quotes form verified suppliers.