The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.
Germany
The precision calibration unit combines high accuracy, low drift, low noise and superior long-term stability with multiple functionality and simple operation. Ramps, Δ+/Δ-, and multiple setpoint storage make the operation of the device easier for the user. For that reason the application possibilities are many: — Calibration of current and DC-voltage meters — Precise testing of thermocouple temperature measuring instruments — Calibration of controllers, sensors, detection devices and other devices used in process control — Open-loop process control with the aid of integrated ramp function Features: — High precision current and voltage source ± 52 mA, ± 30 V — Option: ± 22 mA, ± 60 V — Precision simulation for all conventional thermocouple types (optional) — Error limit 0.003 % Rdg. — Standard with RS232 and IEEE488 interface, USB and Ethernet (optional) — Current "SINK"
Request for a quoteGermany
High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be output in csv format via the USB interface. The software for measured value acquisition and storage is included in the scope of delivery.
Request for a quoteChina
Propane Tank Gauge Level Leak Detector for QCC1 Propane Tank, Brass Propane Tank Adapter Pressure Meter Gauge
Request for a quoteUkraine
The Magnet UV tamper-evident seal is an antimagnetic sticker seal. It is designed to control the protection of metering devices. It consists of a sticker base with a protective layer, a transparent plastic capsule, and a magneto-sensitive suspension inside the capsule. The sticker base has a special inscription - "OPENED" - that appears when there is an attempt to remove the seal from the surface. The inscription does not disappear if the sticker is attached back on. The capsule features a UV glow effect, which makes it easy to check the integrity of the seal in poor lighting conditions. The magneto-sensitive suspension irreversibly changes its pattern when an attempt is made to influence the meter with a magnet with the intention to alter the readings. Clixar manufactures two types of Magnet UV seals that have different sensitivity thresholds - 50 mT and 100 mT. The transparent capsule makes it possible to protect
Request for a quoteCreate one request and get multiple quotes form verified suppliers.