DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.
Bulgaria
The machine is designed for cleaning and degreasing of engine blocks, gearboxes, and other machine parts. The dimension of the engine block 2500x950x800 mm and load capacity max. 2500 kg. The parts are placed on a mobile table, which is positioned in front of the machine and via a mechanical actuator, the board of the table moves inside. The cleaning is carried out by three nozzle collectors – two fixed and one movable. The machine has a mud sump and oil separator. The mud sump catches gross dirt larger than 1.5 mm. The band oil separator is designed for separation of the oil from the washing solution. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.
Request for a quoteTurkey
Flowing the dry cleaning of wheat, it is used for the humidity of wheat with a little consumption of water and time. At the same time, the wheat is unshelled also because of the two rotor, which turns with high speed.It can add up to 7% of water in a single flow-through.
Request for a quoteTurkey
The parts to be washed are placed on stainless steel rotative basket and are washed with water mixted with degreaser under high pressure. Washing is done in order to clean oil, sawdust, dirt and wastes on dirty surfaces from different angles by means of time-adjusted pressurized water nozzles according to the part structure and pollution rate. By filtering the water with the recirculation system, the machine is designed to wash parts with minimum consumption of water, detergent, electricity and time.
Request for a quoteGermany
he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.