Position indicator made of plastic

Body and rotary table Al alloy, anodised. Spindle steel, casehardened. Spindle bearing maintenancefree. Position indicator plastic. Version Radial play of rotation axis < 0.015 mm. Axial play of rotation axis < 0.02 mm. Repeat accuracy < 0.05°. Spindle selflocking. Note 360° adjustment with no end stop. The position indicator displays in 0.1° increments clockwise. The angle of rotation is indicated directly on the large LCD display. The rotary stage rotates anticlockwise. Reset, chain dimension and offset settings can be made via the keypad. 2 years battery life. The battery is quick and easy to replace. The mounting position of the position indicator is set in 4 positions using one screw. Transmission ratio 211611008 = 501 211611012 = 551 211611025 = 501 The modular design enables the rotary stage to be easily combined with other items of the same size. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom

The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".

The GEMÜ 1235 electrical position indicator is suitable for mounting to pneumatically operated linear actuators. The position of the valve spindle is electronically detected and evaluated through play-free and non-positive mounting. Intelligent microprocessor controlled functions make commissioning and support during operation easier. The current position of the valve is displayed via high-visibility LEDs and fed back via electrical signals. The GEMÜ 1235 has been specially designed for valves of small, medium and large nominal sizes with a stroke of 2.2 to 74.4 mm. — Communication and programming interface IO-Link — Adjustable switch point tolerances — Speed-AP function for fast mounting and initialisation — High visibility position indicator by LED — Can be fitted to GEMÜ valves or third-party actuators — On-site or remote end position programming via programming input

Due to the space-saving enclosures and the high protection class the position switches of the M49 series are perfect for an installation where a flat design and a high protection class of IP67 is required. — Flat and compact design — Pre-installed connecting cable (1m length) for quick and easy installation — Top-mounting versions available — Cable outlet on the side or at the bottom — High protection class IP67 — Suitable for safety applications according to DIN EN 60947-5-1 (positive break) — Different cable lengths available on request