Optical Inspection / Solder Paste Inspection JUKI’s RV2 3DH analyzes the three dimensional shape of the completed board and compares the shape against the specification based on the outlines, heights, and brightness of the components and solder. It then judges whether the board is OK or NG (no good) based on the analysis. The 2D check function is also available.
Germany
Our production facilities are fully up to date. Thanks to the adjustable design of our lines, we can easily implement special solutions. The 3D automatic optical inspection of SMD components combines 2D and 3D inspection at maximum speed. Some of our machines allow an inspection in 360 ° steps. Depending on the machine, excellent dynamic properties and the highest positioning speed can be achieved on the basis of linear drives.
Request for a quoteGermany
In the cryogenic blasting process, an enrichment of rubber and plastic waste powder takes place due to fine abrasion during the treatment procedure. Thus the performance and processing time of the blasting-media will deteriorate and decrease its jet-energy. In our cryognic deflashing machines, the blasting-media is primary screened by the treatment drum perforation, however, after a long operating time the amount of rubber and plastic waste powder increases. In order to guarantee a constant, statistically secure and economic processing, this powder has to be removed periodically from the blasting-media. Our automatically working blasting-media recovery machine consists of a suction & drying system and a vibrating-screen unit. The used blasting-media has to be aspirated manually from the deflashing machine. The drying of the polluted wet and cold media takes place in the suction tank and the cleaning by screening with final separation into waste powder, waste media & re-usable media,
Request for a quoteFrance
Characteristics of the machine : - Closing force: 2,000 kN. Available in double station, triple station or multi-station versions. Hot-cold process for carbon fiber or glass applications.Characteristics of the machine : - Closing force: 2,000 kN. Available in double station, triple station or multi-station versions. Hot-cold process for carbon fiber or glass applications.
Request for a quoteTurkey
AHP manufacture a range of laboratory rotomolding machine for compound manufacturers research purposes to study mold melt flow properties.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.