Wrought Iron Condition furnace Machine product feature capacity 1000pieces an hour,800 degrees heat power.motor output 1.1 KW 2800 rev.
Germany
In the WTH 200.2, the following materials can be reliably brazed with active materials in a high vacuum. PCD (polycrystalline diamond) MKD (monocrystalline diamond) CVD diamond (chemical vapour deposition) PCBN (cubic boron nitride) and Hard metals as well Ceramics In the high-vacuum furnace WTH 200.2, our customers manufacture indexable inserts, dressing wheels, rotating tools and turning tools with blades made of natural diamond or MKD for polish turning. The vacuum brazing is flux-free. In the so-called active brazing process, titanium allows wetting of the surfaces. While cemented hard metals can also be inductively brazed, diamonds, CVD and ceramics must be actively brazed in a vacuum. When brazing PCD and PCBN, not only the hard metal substrate but also the PCD or PCBN layers are wetted.
Request for a quoteAustria
Threaded rods and pins made of molybdenum and the molybdenum alloy TZM are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop.
Request for a quoteGermany
aluNORM was developed to protect electrical or electronic components. Due to the large number of standard sizes in four variants, the maximum level of product variety is guaranteed. Typical ROLEC single-channel mounting combines the screw channel for attachment to the wall with the one for closing the enclosure. This provides more space in the interior for your internal mounting. An EMC version is available for the AS and AD variants. This is also available for the AF and AH variants in the dimensions marked. Fastening domes in the lid and bottom enable simple installation of supporting rails, mounting plates, circuit boards and more. Matching cable glands are also available.
Request for a quoteGermany
To connect two aluminum profiles at right angles 1 Profile connector 90° (Set) Model: Steel, slot 8 - 10 Surface: Zinc plated Set 1-I: 1 profile connector 90° with 1 self-forming screw S7 x 22 or S8 x 25 Set 2-I: 1 profile connector 90° with 1 screw M8 x 22 or M8 x 25 Set 1-B: 1 profile connector 90° with 1 cutting bush S12 and 1 screw M8 x 25 Set 2-B: 1 profile connector 90° with 1 threaded bush M12 and 1 screw M8 x 25
Request for a quoteCreate one request and get multiple quotes form verified suppliers.