The piko series from termotek is a further development of the successful P300 series. Also an active cooling system, piko is therefore also suitable for applications which require a particularly high degree of temperature stability of +/-0.1 K. Being a plug-in cooler, piko is suitable for integration in a wide variety of systems. The height varies according to the power: sizes ranging from 3 to 12 RU (rack units) with a refrigeration capacity of 250 W to 3.5 kW are available as standard. The service-proven cooling concept of the P300 series is continued in the piko, which also uses deionised water for the cooling medium as well.
Italy
Dry coolers are simple and reliable equipment. Their operating principle is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when the (cooler) ambient air laps the surface of the latter. Fins are used to increase the overall heat exchange surface area so that the equipment can be as compact and efficient as possible.
Request for a quoteSpain
AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.
Request for a quoteNetherlands
The WWKGD40 is a compact water cooler that can easily be installed in, for example, coffee machines or a kitchen cupboard. The built-in thermostat allows you to set the desired temperature. The water cooler can be easily connected to the water supply network. It requires hardly any maintenance and always supplies refreshing cooled water.
Request for a quoteUnited Kingdom
We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger
Request for a quoteCreate one request and get multiple quotes form verified suppliers.