The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output
Hong Kong
The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics
Request for a quoteHong Kong
The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.
Request for a quoteHong Kong
The MAXIM Interface - Drivers, Receivers, Transceivers MAX232CWE is a 16-SOIC package device that supports the RS232 protocol. It has two drivers and two receivers, and is packaged in a tube for easy installation. The device is designed for surface mount applications and has a 16-SOIC package case with a width of 0.295" (7.50mm). It operates on a voltage supply of 4.5 V to 5.5 V. This device is ideal for applications such as serial communication, data transfer, and other communication systems.
Request for a quoteHong Kong
The MAX3221EAE+ is a high-performance, low-power, surface-mount transceiver designed for RS232 communication. It is capable of transmitting and receiving data at speeds up to 235Kbps. The device is designed to operate over a wide temperature range of -40°C to 85°C, making it suitable for a variety of applications. The MAX3221EAE+ features a 16-SSOP package and is powered by a 3V to 5.5V supply voltage. It is designed to provide reliable and robust communication between two devices. The device is also designed to reduce EMI/RFI emissions, making it suitable for use in a variety of environments. The MAX3221EAE+ is an ideal solution for applications requiring reliable and robust RS232 communication.
Request for a quote