Classic Outdoor A Board, 32 mm Profile

The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.

The new poster stand WindSign "Madera" is made of a 40mm wide beech wood frame and is equipped with lacquered chards boards on both sides and is therefore suitable for various industries. The pavement sign "Madera" is equipped with a double-sided magnetic chalk board. The board area of ​​590 x 780 mm can be labeled on both sides with chalk markers / illumigraphes and then wiped off again. The protection of your advertising message can be ensured by the optionally available magnetic protective film. Furthermore, printed posters can be attached directly to the blackboard by means of magnets. The beech wood coated with high-quality, weather-resistant protective lacquer makes this stand suitable for both indoor and outdoor use. To avoid falling over the customer stoppers, the movable pedestal is filled with water or sand and can then still be easily moved by tilting. The spring technology allows a secure stability in wind and weather.

Our WindSign "Seal" is designed for permanent outdoor use. The folding technique of the frames guarantees a quick change of the posters. A circumferential sealing rubber mounted on the rear walls prevents water from entering. The rear walls are also made of weather-resistant polystyrene. The anti-reflective covers made of UV-stabilised material prevent the posters from fading. The installation of the customer stopper is very easy. The frame is simply screwed to the plastic base and the stand is ready for use. The high stability of the Wind Sign is guaranteed by the fillable base and the special spring technology, so that the stand can also be used in stormy weather. Thanks to the wheels integrated in the base, the WindSign "Seal" can be moved easily to the desired position.

This simple poster stand offers a double-sided presentation possibility for your advertising media and information. Due to the size of the inlay, this stand will certainly not be overlooked by your customers! Use the poster stand "20/30" in the sales room of the food or non-food store for always up-to-date advertising posters. This poster display is also a popular tool in public authorities, production facilities or hospitals. Information and warnings can be transported visually in a highly visible way. The two aluminium click frames are attached by means of adapters mounted on the back. The tubing is silver anodized, the steel base is powder-coated in silver (similar RAL 9006). Also available in special dimensions through in-house production from 1 piece!