The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.Voltage +/- 10 V Current 0(4)…20 mA Accuracy 0.01 % (FS) Resolution 16-bit (1 mV / 1 µA) Resolution up to 24-bit (0,01 mV / 0,01 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Adjustable scaling Signal type freely configurable Protected against mechanical stress Fieldbus CAN Protocol CANopen / Raw CAN
Germany
The sensor module µCAN.1.ti-SENSOR can be joined with any sensor and is designed to acquire an analogue temperature signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Temperature Thermo type J, K, L Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo) Accuracy ± 0.2 K (Pt100) Resolution up to 16-bit (0.1 K) Sampling rate up to 1 kHz Signal type freely configurable Sampling rate adjustable Operating temperatures -40 °C … +85 °C Power supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocols CANopen / CANopen FD / J1939
Request for a quoteGermany
From the Idea to Prototyping to Series Production and Evolution – MicroControl plans, develops and manufactures individual solutions MicroControl has more than 26 years of experience in ICA, Bus communication and control technologies. From a variety of different projects we are well aware of the importance of communication and cooperation between all those involved in the project to realize the best solution in due time After a detailed list of technical specifications has been defined in close liaison with the customer, a development plan is created containing time lines and estimated costs. Also, a schedule for prototyping and manufacturing of the series product is established to meet the future lead times, which will give MicroControl customers maximum process reliability. If a non-conformity with the customer’s requirements or any other error is detected, MicroControl will re-design the product without additional costs for the customer to provide the best solution.
Request for a quoteGermany
MicroControl’s I/O modules of the µCAN-BOX product family provide the link for digital and analogue I/O signal networking on a CAN bus. The premium electronics of our µCAN modules facilitates connection of a wide range of sensors and actuators. A/D conversion directly on the spot has significant advantages: due to their robust design the modules may be installed directly at the signal source – even in adverse environmental conditions. An additional control cabinet is not needed. The electronics of the µCAN-BOX series is tightly packed in a rugged aluminium casing (IP66 rated) protecting it reliably from dust and water. Signal wires may be connected via metric cable connectors or M12 plug-in connectors.
Request for a quote