GBM 10 with threaded mandrel and nosepiece M5 including threaded mandrels and nosepieces M 4 and M 6, different blind rivet nut dimensions M 4 to M 6 made of alu for joint thicknesses of 0.25 to 3 mm. Blind rivet nut box Incl. 4 blind rivet nut sizes: Alu M4 x 6 x 11.0 mm Alu M5 x 7 x 11.5 mm Alu M5 x 7 x 13.5 mm Alu M6 x 9 x 15.5 mm
Germany
Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 575 g Total length: 260 mm Stroke: 8 mm Accessories Nosepieces:10/18, 10/24 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of chrome-vanadium steel, forged • Steel inserts on all bearing points subject to wear • Intermediate lever system reduces the force required and dampens the tear-off effect • Narrow pliers head for difficult to access rivet locations • Ergonomic slip handles • Simple maintenance – fast jaw change
Request for a quoteGermany
Easy stroke adjustment, quick exchange of mandrel without extra tools. Working range: Blind rivet nuts from M4 bis M6 Alu and up to M5 steel and stainless steel.
Request for a quoteGermany
— The proven working method of the GESIPA® hand riveter Flipper® and the ergonomic principle also save up to 40% hand force when setting blind rivet nuts with the FireFly. hand force when setting blind rivet nuts. — A special lever arrangement as well as the ratchet mechanism allow working with extremely low hand force. — Tool-free change of mandrel and nose piece — Large stroke of 9 millimetres for easy setting of blind rivet nuts, even in thin joint material thicknesses, and for setting of PolyGrip® blind rivet nuts — Tool-free adjustment of setting stroke and mandrel lengths enables uncomplicated setting of blind rivet nuts of different lengths Sets blind rivet nuts from M3 to M6 aluminium and from M3 to M5 steel Technical data: Total stroke: 9 mm Single stroke: 1.8 mm Weight: 750 g
Request for a quoteGermany
The combi setting tool Flipper® Plus is a combi setting tool for blind rivets and blind rivet nuts. A tool-free conversion from blind rivet to blind rivet nut setting tool is possible in under one minute in just a few simple steps. The ergonomically designed hand tool has a new ratchet function. The force increases when the handle is closed. This finding is put to good use in a special lever arrangement for setting blind rivets and blind rivet nuts. The required manual force is reduced by around 40 percent if actuated several times. Due to an actuation lever with an opening spring the tool can be used easily for a single-handed operation. The jaw mechanism with spring reset arranges a safe and automatic mandrel ejection. The rivet mandrel collection container can be clipped to the body casing and is easy to empty. The larger device lift is a benefit when handling extra long blind rivets. The Flipper® Plus offers a simplified setting procedure for blind rivet nuts.
Request for a quote