France
Manufacturer/ Producer
France
EMG can offer you a wide range of bottom strippers rubber cushions nitrogen cushions pneumatic cushions standard products or according to your needs
Request for a quoteFrance
Save time and precision for the bottom dead center fine adjustment thanks to a digital indicator of the slider travel With this digital indicator, the user can clearly watch the press power in order to stop the press in case of overloading pre-determined value.
Request for a quoteFrance
Many different ways can be adapted to lubricate your strip lubrication with wet rollers lubrication with micro-lub spraying system The equipment is delivered with the machine already connected.
Request for a quoteFrance
On request, we can fit your press with a complete feeding line set, delivered with the press and ready to work. decoiler straightener feeder, cutter
Request for a quoteDesigned and manufactured by the French constructor Etablissements LONG, EMG presses have been used for over 50 years in numerous sectors of industry, especially: clock- and watchmaking, jewellery, eyewear, electrical appliances, automobile constructions, household appliances, toys, locks, etc. EMG presses are known around the world for their resistance, reliability and endurance. Capacities from 200kg to 80 tonnes, the EMG range offers a wide choice of technologies and options for all applications: manual presses, pneumatic presses, marking presses, mechanical presses, hydro-pneumatic presses, hydraulic workshop presses, automatic with vertical screen, with electronic guard, soundproof booths, decoiler-straightener, feeder-cutter and a range of other accessories. LONG controls the entire design & manufacturing process in-house, and it warrants that it will design and fit the special machines that your line of business requires.
Manufacturer/ Producer
80 rue du Loquois
Zae rumilly sud
74150 Marigny-Saint-Marcel - France
Germany
The type UMR tube forming machines use smart operating technology with many predefined settings that can be retrieved automatically to achieve perfect mirror-like surfaces. When producing flares with 20°-90° angles, with a clamping length of 1 x D, the machine achieves perfect sealing surfaces. Flaring up to 90° can be produced in a single cycle. Tools can be changed extremely quickly. With the appropriate tools, the machine can also close tube ends.
Request for a quoteGermany
Our rotational technology increases the possibilities of forming on tubes with minimal expenditure on tools. All the drives are servo-electric by design and, if needed, CNC-operated. In our SRM rollforming machines, all the settings are preloaded, so there is no longer any need for costly adjustments. Different tool variants further expand the processing possibilities for chipless cutting or post-bending cutting. The machines can produce internal and external profiles and can also roll in synchronicity thanks to a special tool head (inside/outside).
Request for a quoteGermany
With the new generation of our combination machines, we have continued to develop the new diversity for forming pipes. Geometries that effectively replace high-cost and expensive turned parts can be formed directly at the pipe end in the endforming machine – for a final component of a single workpiece that is ready for use without elaborate soldering or welding. Implementation of the combination can be specified by you or based directly on the forming geometry. This is usually done using up to 6 axial forming stages and at least one rotary unit. Trimming, as well as axial and rotary forming, may require 2 rotary forming stations. Simple trimming or deburring after forming at the pipe end are no demanding challenges. Therefore, all our axial forming machines and combination machines are equipped with one or several single-drive axes. They have a servo-electrical drive and can be used in each of the holders for the forming stages, making the system is very flexible and compact.
Request for a quoteGermany
Contents Blind rivet hand tool NTX and 5 blind rivet sizes, 1 maintenance wrench. Weight: approx. 2.5 kg Dimensions: 275 x 145 x 40 mm Also available as junior riveting kit PolyGrip®
Request for a quoteCreate one request and get multiple quotes form verified suppliers.