China
Manufacturer/ Producer
China
NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance
Request for a quoteChina
The HT1200M is pin-compatible with the SYM20C15 and HT20C15. Available in LQFP32 and QFN 32 Fully compatible with ON OnSemi's A5191 and HT2015.
Request for a quoteChina
The HT1200M is a single-chip, CMOS modem for use in Highway Addressable Remote Transducer (HART) field instruments and masters. The modem and a few external passive components provide all of the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect and transmit-signal shaping. The HT1200M is pin-compatible with the SYM20C15 、HT20C15 and fully compatible with ON OnSemi's A5191 and HT2015. Available in LQFP32 and QFN 32
Request for a quoteChina
Fieldbus products are applicable to the design and development of all kinds of fieldbus devices. We provide fieldbus communication chips-M series embedded communication modules-G series fieldbus protocol conversion gateways and other products for different needs to help users quickly complete the development of fieldbus intelligent instruments. https://www.microcyber-fieldbus.com/product/fieldbus-hart-to-modbus-gateway
Request for a quoteChina
It's very popular that our pressure and temperature measurement transmitters in oil and gas market , and HART modem is essential basic equipment. For some customers who want to connect two different industrial networks, we provide a cost-saving solution that gateways equipment. It basically realizes full communication, for Modbus, HART, Profibus, FF and DP. G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output. Connect different control systems (Siemens, Emerson, Schneider Electronics, ABB, Yokogawa, Rockwell, etc.)
Request for a quoteChina
Parameters Basic Parameters Bus Power Supply: 9~32VDC Current consumption (static):≤14mA(FF/PA) 11V~35 VDC(HART) Input Signal: Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance, B, E, J, N, K, R, S, T eight degrees of Thermocouple, -100mV ~ 100mV Voltage Signal The Channel Number: Single Channel Fieldbus Protocol: FF/PA/HART Insulation: Between the Terminal and the Housing:500Vrms(707VDC) Operating Temperature: -40℃~85℃ Humidity Range: 0%~95%RH Starting Time: ≤5secs. Turnover Time: 0.5secs. Electromagnetic Compatibility: In Line with the GB/T 18268-2010 Explosion-Proof Sign: Ex ia IIC T4 Ga (HART)
Request for a quoteChina
NCS-TT105 Temperature Transmitter adopts fieldbus technology, is a new generation of fieldbus smart temperature transmitter, and is an indispensable field device in process control. NCS-TT105 smart temperature transmitter supports HART, FF, PA protocol and can be widely used in petroleum, chemical, power plant, metallurgy and other industries. NCS-TT105 Smart Temperature Transmitter: 1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols 2. Support 6 types of thermal resistance and 8 types of thermocouple 3. Thermal resistance supports 2-wire, 3-wire and 4-wire 4. The cold end compensation accuracy of thermocouple is ± 1.0℃ 5. High precision (better than grade 0.1), low temperature drift (better than ± 50ppm/℃)
Request for a quoteChina
1. A simple way to transparently transmit I/O data between two networks 2. Connect different control systems (Siemens, Emerson, Schneider Electronics, ABB, Yokogawa, Rockwell, etc.) 3. Support mainstream process industry communication protocols (Profibus DP, Profibus PA, HART and Foundation Fieldbus) 4. Support DD file, you can quickly configure parameters 5. 1-year product warranty from the date of shipment For our 4-20mA current converters, they are very popular and can help most of clients to savecost. 1. Transmitter for connecting analog signal to Fieldbus/Fieldbus signals to analog signals 2. Support 4-channel 4-20mA analog current input/output 3. Pass the FF H1 protocol interoperability test of FCG 4. It can pass the interoperability test of PNO's PROFIBUS PA protocol 5. High precision (normal temperature ± 0.05%), low temperature drift
Request for a quoteChina
NCS-HM105 HART Modem--As the leading company of industrial Internet of things, Microcyber Corproation has decades of experience in industrial Internet of things, HART MODEM is one of the hottest products on Microcyber. HART signal MODEM (HART MODEM) is a necessary tool for instrument manufacturers to upgrade products and control signal conversion on site.
Request for a quoteChina
Fieldbus power conditioner applies to Foundation Fieldbus and PROFIBUS PA control system and provides power to bus-powered devices. Matched with Fieldbus terminator, it adopts uniform impedance characteristic to reproduce bus signal perfectly. NCS-BP105 Fieldbus Power Conditioner: NCS-BT105 Fieldbus Terminator: 1. Bus power supply, suitable for fieldbus conforming to IEC 61158-2 standard 2. Comply with the FF-831 bus power supply test specification 3. Support power supply redundant connection 4. Active impedance control method 5. Servo voltage output, meeting the requirements of long distance power supply
Request for a quoteTurkey
It is used to give water for tempering in flour factories. It works semi-mechanically.
Request for a quoteSwitzerland
For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel
Request for a quoteSwitzerland
Suitable for a wide variety of applications from cooling circuits, dosing pumps, white goods, CIP systems for food industry, agricultural machines, industrial wet vacuum cleaners, to gear oil used in metalworking and mining, IST AG's new thermal OOL mass flow meter can be easily integrated into new or existing industrial systems. Its robust housing contains IST AG's well-established OOL technology that makes the corrosion resistant thermal mass flow ideal for flow monitoring of aqueous solutions, alcohols and oils, including aggressive liquids. Further features include: Calibration range: 1-200 kg/h Temperature compensated: from +5 °C to +50 °C Fluidic connection: tubing with 4 mm inner diameter Flow channel inner dimensions: 3.7 mm Single wetted material: stainless steel 1.4301 Response time t63: 0.5 seconds
Request for a quoteGermany
Different flow ranges possible - Overpressure and underpressure possible - Two measuring ranges possible in one device
Request for a quoteCreate one request and get multiple quotes form verified suppliers.