Grinding - machine tools - Import export

Width 100 mm Bedplate and load bearing structure with easy dismounting Support cross members Main shaft group Front and rear plate unit Feed roller unit with micrometric adjustment Main drive unit Brush and feed rollers unit driven by servomotor Grinding wheel dressing unit gr. 36 Pneumatic control panel Electrical control panel Electronic programmable logic unit using a dedicated software for total management of machine functions with dust suction device CZ Dust Collector C4 Metering device (Alarm with light to inform about maintenance periods)

Precision forged parts are forged parts where very narrow tolerance can be achieved by following the forging process permanently. Our processes enable forging with the +/- 0.1mm tolerance. We are specialized in the production of precision forged parts weighing between 0.001kg and 1kg made of different material. The advantage of precision forged parts is that they can be used mostly in different compounds and without additional mechanical machining. Hot die drop forging is the method in our company – sticks are heated and inserted into the appropriate forging tool.After the forging process, we trim and pierce the semi-finished products to meet many shapes and other requirements. We shape stainless, alloy and carbon steels. In most cases, more complex and larger forgings are further machined.Due to the specificity of precision forgings, we provide the minimum necessary additional machining and thus reduce the machining times.

Diamond grinding tools with VIB-Star core for technical ceramic components. Diamond grinding tools with cushioning plastic core system for machining very hard materials and technical ceramic components. Straight diamond grinding tools in vitrified bond for the machining of ceramic components require special damping, thus VIBSTAR is only available in certain dimensions on request. Damping + low weight Better surface finishes Longer lifetime Improved grinding ratio

Grinding wheels in elastic bond for the centreless grinding of taper rollers For the centreless grinding of taper rollers, a steel profiled regulating wheel is used. A certain elasticity of the grinding wheel is required so that the rollers can still be operated safely. The Tyrolit centreless wheel in elastic bond has proven highly effective. Good profile retention and lifetime Good coefficient of friction

Vitrified and resin-bonded tools for honing and superfinishing Honing and superfinishing stones are made from conventional abrasives (aluminium oxide and silicon carbide) as standard. However, Tyrolit also produces these tools using superabrasives (diamond and CBN). Honing and superfinishing is used on components with especially high demands concerning the surface finish and geometry. The demands on the honing and superfinishing stones are also correspondingly high. Consistent quality Good stock removal Good surface finish

Metal-bonded grinding tools for flute grinding With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for the flute grinding of tungsten carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to significantly reduced grinding forces or to a major increase in profile retention. The precision of the machined tools remains at the usual high level. Increased feed speed Easy profiling Extended dressing intervals

For cleaning and dressing grinding wheels

Ceramic whetstones, abrasive files, small files, hand lappers and burnishing wheels, Degussit for the professional!

We represent the Sebald company in Switzerland. This company manufactures ceramic grinding wheels in its own production in Germany and has an excellent track record. With this we want to offer our customers an improved service. We look forward to conducting appropriate trials with you.

Jung JF520 surface and profile grinding machine in very good condition. Machine No. 1569. Year of construction 1981 - Grinding length max. 600 mm - Sliding width: 200mm - Magnet size: 500x175mm - Grinding wheel dimensions: 250x25x50.8mm Bcspaqsayd8 - Spindle speed: stepless 4200 omw./min. - 380V 4kW - Weight about 2000kg Equipment: - 1 axis digital display, - Flanges - Infinitely adjustable spindle speed - Infinitely variable hydraulic supply in transverse direction - auto lubrication system, - Automatic height feed with rapid traverse - machine books

The CMB series hammer mills manufactured by our company are intended to crush and uniform fractions of dry bulk materials with moisture contents of up to 15% and destined for further technological processes. There is option to grind raw materials with higher moisture content, but this parameter has a very significant impact on the device performance. Depending on needs and purpose, CMB series hammer mills cay operate with capacity from 2 t/h to 10 t/h. The raw material is crushed by the impact of the hammers on the raw material and the raw material against the walls of the crushing chamber. The regularity and size of the resulting fraction is determined by the diameter of the holes in the screen used. We recommend collecting the crushed material from under the mill with pneumatic transport, as this enables the use of a pneumatic separator to sift out stones and other impurities that may cause explosions. The use of pneumatic transport will also increase the performance of the mill.

The unique belt guide system allows the use of very small belt widths without the belt coming off the roller. The tensioning system ensures continual tension in the belt thus contributing to the safety of the guide system. Available in lever or rotary valve variants. Individual work through the rotatable head. Furthermore it has a protective cap for safe handling.

The best MB20 that we have ever had. What‘s new? • Higher speed of up to 34,000 rpm for finer, more precise work. • The motor is protected from overloading by an automatic cut-out. • Restart protection provides a high degree of safety. • Prolonged motor life through optimum dust protection. Inexpensive to purchase and maintain. Safe to operate. • Cost-effective universal motor in a sturdy plastic shell. • Automatic cut-out if wear occurs to the carbon brushes • Soft start. • Degree of protection: IP 20, Protection class: II Specifically designed for versatile use in mould making • Constant speed under load. • Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing. • The machine can be operated standing upright or suspended from a hook.

Developed for slight to heavy grinding and milling for tool and mold making, as well as for deburring, fettling and brushing work in foundries, container and steel construction and mechanical workshops. The lightest and most compact machine in its class for the toughest jobs. * Unbeatable power-to-weight ratio with 2.8 kW at 34 kg. * Ultra-strong asynchronous motor ("continuous runner") with top efficiency. * Indestructible, absolutely maintenance-free, virtually no wear. * Particularly suitable for large tool diameters. * Ideal for working on large surfaces. * Motor overload protection. * Constant speed under load. Comfort and safety features: * Wide range of possible combinations for shafts and handpieces. * Machine can be operated free standing, on table stand or on travelling stand. * Restart protection. * Soft start. * Protection class: IP 55, protection class: I

It is not only being able to change the belt so quickly that makes this belt grinder so distinctive. You can grind an area using the telescopic arm and then change to grinding a point on the rubber roller with the fixed grinding arm. This can be done very easily with a clamping screw. In addition, the machine is available, entirely in accordance with your requirements, with grinding arms for belt widths of 8, 15 or 20 mm. Changing them is easy and requires little effort.

Milling, grinding, brushing, polishing, filing – and all with a single device! This all-rounder is suitable for use in almost all sectors of industry The best results are achieved through digital sensorless control electronics. This ensures: * Consistently high torque at any speed between 5,000 and 15,000 rev/min. * Constant speeds at different loads. * Retrieval of power reserves: at maximum load a remarkable peak power of 1.5 kW. Above this the machine is shut down by the overload protection. * No pulsation in the low speed range. * Work results in smoother surfaces. Low maintenance costs and no unnecessary downtime * The motor is protected from overloading by an automatic cut-out. * Automatic cut-out if wear occurs to the carbon brushes. * Fully encapsulated sensorless electronics cannot be clogged with metallic particles. * Electrical surge protection prevents current peaks and protects the motor. Delivers the highest attainable degree of occupational safety and comfort.

Dimensions range - Minimal - 80 x 80, Maximal - 6000 x 3000, 6000 x 2800, 3600 x 2200, Thickness range - 3* - 19, 3* - 19, 3* - 19, Edge type - The line for edge grinding, Double edge processing, Four edge processing, Notes - C-bevel Trapezoid **Blunted *** The matt or polished edge, C-bevel Trapezoid ** The matt or polished edges, C-bevel Trapezoid ** The matt or polished edges. * Glass with a thickness of 3 mm we don’t finish of trapezoidal profile. **Finishing of trapezoidal profile is performed by peripheral grinding wheels with not adjustable width phase of 0.5 mm. ***Blunting is performed on customer request in order to prevent of accidental laceration during glass installation, as well as in the case of glass designed for tempering, if any treatment of edges foreseen.

Two Magazines in One - A step by step magazine for material up to 6mm and a gravity magazine for larger material Flexibility - Re-tooling takes minutes thanks to the use of snap-in guide channels High Performance - Works with closed calibrated channels ensuring high speeds with reliability, precison & silent operation Headstock Synchronicity - Fitted with a mechanical system that give both reliability, precision & a reduction in idle times The Elite is a premium bar feeder, simple to use. It is designed to meet the needs of those who are looking for the best possible performance and reliability, accurate selection of thin bars, adaptability when changeovers are needed, and a guarantee of rigidity even for the most challenging machining applications. * Based on indicative data. Material, Bar Length & Parameters can significantly affect this time ** Max Capacity

Rigidity - The new Boss HD (Heavy Duty) structure guarantees the barfeed absorbs a larger quantity of vibration Operator interface - The new enhanced operator interface has new user friendly functions. Touch screen is available Non productive times - Bar change and feeding times have been drastically reduced increasing productivity Magazine capacity - Several options available to increase capacity for longer unattended production The BOSS 552 HD is an automatic bar feeder for bars with diameters between 5 and 51 mm, ideal for working with fixed headstock and sliding headstock lathes, available for bar lengths from 700 to 6,380 mm. It guarantees the maximum reliability without any compromises. * Based on indicative data. Material, Bar Length & Parameters can significantly affect this time

Rigidity - The new Boss HD (Heavy Duty) structure guarantees the barfeed absorbs a larger quantity of vibration Operator interface - The new enhanced operator interface has new user friendly functions. Touch screen is available Non productive times - Bar change and feeding times have been drastically reduced increasing productivity Magazine capacity - Several options available to increase capacity for longer unattended production The BOSS 338 HD is an automatic bar feeder for bars with diameters between 3 and 38 mm, ideal for working with fixed headstock and sliding headstock lathes, available for bar lengths from 700 to 6,380 mm. It guarantees the maximum reliability without any compromises. * Based on indicative data. Material, Bar Length & Parameters can significantly affect this time

The power and performance you need to drill deeper and faster Buildin silencer Reversible Variable speed adjustment Rubber grip reduces chilled hand

Sands to a clean finish and more in less time. Compact and light. Light sanding with piston movement A compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation. Incorporates no gears and other complicated mechanisms

Superlight, Quiet New lowvibration sander Small and Lightweight for Comfort and Convenience Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots. Minimized Hand Vibration The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Superlight, Quiet New lowvibration sander Small and Lightweight for Comfort and Convenience Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots. Minimized Hand Vibration The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Compact yet extremely powerful. Builtin adjustable speed regulator Sand and polish metal, wood, plastic to a super fine swirlfree finish. Light weight, compact, powerful, whisper quiet, and adjustable speed regulator. Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort Available with NV(No Vacuum), CV (Central Vacuum) or SV (Self Vacuum) Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces Arm and Shoe size 20 x 520 mm avaiable BABY BELTON Compact and lightweight, yet powerful. Alternative rotation direction. Ergonomically designed for right or left hand operator convenience.

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces BABY BELTON Compact and lightweight, yet powerful. Alternative rotation direction. Ergonomically designed for right or left hand operator convenience.

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces