ECLIPSE SOLUCIONES INFORMÁTICAS

Ideal to assemble IT racks

Supports protocol conversion between Modbus and PROFIBUS Supports RS485, RS422 and Rs232 Supports Modbus master and slave, and supports RTU or ASCII Supports working environment of -40~85°C PROFIBUS-DP: Max. Input 244 bytes, Max. Output 244 bytes DPM01:1-way Modbus to PROFIBUS slave gateway, sum of input and output is 288 bytes. DPM02: (customization) 1-way Modbus-RTU to PROFIBUS slave gateway, sum of input and outputis488 bytes

Directly install on PPI communication port of PLC or EM277 communication port. No need for external power. Simultaneously connect S7TCP and Modbus TCP communication. Supports connections Max. of 32 hosts. Integrated Modbus TCP Server, Modbus data area can automatically or editorially mappingto S7-200 register. PPI to S7 Ethernet/Modbus-TCP converter. Supports Simens S7 Ethernet ommunication derive, including MicroWIN. Supports Win CC to directly connect S7-200 in TCP/IP. Support sone key reset.

CANopen to Modbus TCP protocol converter MG-CANEX is a protocol converter from CANopen to Modbus TCP. The device plays as the master in the CANopen network and it could be connected to the standard CANopen slave devices. The data transmission supports PDO, SDO, and error control supports Heartbeat. It Supports synchronous and asynchronous message sending. As a TCP server in Modbus TCP network, the device could be accessed by 5 TCP clients at the same time, and it could be connected to PLC controller and various kinds of configuration software. It could also connect optical transceiver and to realize long-distance data transmission.