POLSHIP SP. Z O.O.

Welded construction parts are manufactured all according to ISO Standards of certifed Suppliers.

With our extensive supplier portal, we can cover all your needs in the field of cold and hot forged castings. Trust us in choosing the right supplier for your needs

"Argon-arc welding Electric arc welding Gas metal arc welding Arc welding"

Particular challenges To correct the effect of the tolerances of the parts, the welding robots path in conventional applications is usually adjusted, by means of a time consuming manual correction (teaching). The warping effect caused by the thermal expansion however cannot be compensated this way. For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position.