Results for

Manufacturer Producer - Electric and pneumatic valves

48 Companies

29 Products

FLUID SYSTEMS & AUTOMATION GMBH

Germany

Fluid Systems & Automation GmbH (FSA Valve) is a leading company in the field of fluid technology. It develops, produces and sells valves and automation solutions for industrial applications worldwide. FSA Valve places great value on innovation, quality and sustainability. Product range: Solenoid valves: available in brass, stainless steel and plastic, suitable for water, air, oil and aggressive chemicals, in normally open and closes variants Motorised ball valves: made from brass and stainless steel, ideal for irrigation, mechanical engineering and the food industry, with precise control options Ball valves: one-, two- and three-part variants for efficient flow control, robust and reliable. Pressure controllers: pressure reducing controllers, pre-pressure controllers and reducing stations for constant pressure control (FSA Valve). Pneumatic actuators: double acting and spring return actuators for efficient pneumatic systems. Quality and sustainability: FSA Valve focusses on quality and environmental management to ensure the best possible product quality and environmentally-friendly production. This involves internal quality controls and compliance with international standards. . Customer support and service: the company offers comprehensive customer support with regard to production selection, installation and maintenance as well as technical documentation and maintenance kits for all products.

Website
VALPRES S.R.L.

Italy

Valpress is the leading manufacturer of steel and cast iron ball valves and has a vast product catalogue that aims to fill all requirements and meet all expectations. This offer has been extended recently by the introduction of trunnion, cryogenic and control valves to bring us even closer to our customers by our ability to offer cutting-edge solutions. We hold the following certifications: ISO 9001, ISO 14001, OHSAS 18001 and ISO 50001.

Website
VALPRES S.R.L.

Italy

Valpress is the leading manufacturer of steel and cast iron ball valves and has a vast product catalogue that aims to fill all requirements and meet all expectations. This offer has been extended recently by the introduction of trunnion, cryogenic and control valves to bring us even closer to our customers by our ability to offer cutting-edge solutions. We hold the following certifications: ISO 9001, ISO 14001, OHSAS 18001 and ISO 50001.

Website
V.M.C. SPA THE ORIGINAL ONE

Italy

The company V.M.C. SPA THE ORIGINAL ONE, is a Manufacturer/ Producer, which operates in the Valves for pneumatic equipment industry. It also operates in the single valves, valves, and pneumatic and electric valves industries. It is based in Creazzo, Italy.
MAC VENTILER

Denmark

The company MAC VENTILER, is a Manufacturer/ Producer, which operates in the Food Industry - Machines & Equipment industry. It also operates in the pneumatic and electric valves industries. It is based in Espergærde, Denmark.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

KAMAT GMBH & CO. KG

Germany

Efficient high-pressure technology for the very highest demands – KAMAT is your expert for industrial high-pressure applications. Achieve maximum efficiency and quality in your industrial applications with KAMAT high-pressure technology. Our outstanding Triplex and Quintuplex high-pressure pumps, power units, complex pump systems and high-quality high-pressure accessories are the ideal solution for your jetting, hydraulic and process engineering requirements. Since 1974, KAMAT has stood for experience and expertise in the production of high-pressure technology – Made in Germany. We provide you with tailor-made solutions that can be adjusted to meet your individual needs. As a medium-sized, second-generation family company, we are proud to develop and produce tailor-made high-pressure solutions for the international market. Overcome your industrial challenges with our high-pressure technology at your side. Discover the impressive performance of KAMAT today and let us help you achieve your goals.

All the products for "electric and pneumatic valves"

Multi User Valves

Electric High-Pressure Unit

Diesel High-Pressure Units

Control Valves

Website See all products
MV AUTOMATION SYSTEMS GMBH

Germany

We, MV automation systems GmbH, are the ideal specialists you can turn to when you need solenoid valves and accessories for industrial use. With us, you won't just receive an individual consultation from our expert personnel but also first-class solutions tailored to customer requirements. Our comprehensive range of services include a complete solenoid valve and pneumatics product range so that we can meet any needs you may have perfectly. We offer: Customer-specific valve designs, coils in any voltage, coils with expanded voltage tolerances, pre-fabricated assemblies, valves for special applications. Since we are always dedicating ourselves to new challenges with commitment and drive, we are sure to find the perfect solution for your application as well. Upon request, we will happily establish a free quote for you. You can reach us by phone or via our contact form. We look forward to hearing from you! Your MV automation systems GmbH team

Website
CIC - KLAUS CZERWONKA

Germany

As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

All the products for "electric and pneumatic valves"

NAMUR VALVES - SEEN

SPECIAL VALVES FOR PNEUMATICS, HYDRAULICS, VARIOUS MEDIAs

CYLINDER ISO 15552 – CF

BALL VALVES – BV AND VR

QUICK EXHAUST VALVES – VR

Website See all products
ROTEX AUTOMATION EUROPE

Netherlands

Rotex is India's largest solenoid valve manufacturer and a global supplier of solenoid valves, Pulse valves, and angle seat valves.. In the last 55 years, Rotex has supplied over 9, 500, 000 valves to over 7000 customers across 73 countries from 71, 000 catalog and over 6100 customized solutions. We provide worldwide coverage with our 3 international offices in UAE, Netherlands, and Malaysia and 83 international distributors spread across over 55 countries. We offer a broad range of solenoid valves including 2-way solenoid valves, 3-way solenoid valves, 5-way solenoid valves, Low power Solenoid valves, High-Pressure Solenoid valves, Explosion Proof Solenoid valves, SIL3 rated solenoid valves, Intrinsically Safe solenoid valve etc. Rotex is also a leading manufacturer of positioners and electro-hydraulic actuators with a wide range of capabilities like smart positioners, electro-pneumatic positioners, and electro-hydraulic actuators providing torque from 25 NM to 600K NM. Founded in 1967, the company has a long history of excellence in developing highly engineered products to meet the fast-paced technological needs of the process industries. Rotex has over 18+ utilities patents over Solenoid valves and 14+ patents over electro-hydraulic actuators and positioners. It has over 11+ international Product certifications like SIL3, ATEX, UL, IECeX, INMETRO, etc, and Quality system certifications like ISO9001, ISO14001, ISO45001, AS9100D, and IATF 16949.

All the products for "electric and pneumatic valves"

Pneumatic Solenoid valve

Pneumatic Solenoid Valves

Website See all products
TECNIDRO

Italy

Tecnidro srl is a company that, since 1987, has been developing and trading a wide range of automatic hydraulic valves for the industrial and water works sector. It offers a complete range of irrigation valves and accessories the includes: hydraulic valves, meters, tangential meters, water meters, prepaid system water meters. It also produces Saddle Water Meters, Woltmann meters. Tecnidro srl also produces high-performance automatic valves for the fire prevention sector.

All the products for "electric and pneumatic valves"

Electric Deluge Valve

Idromembrana Vhf Ip-idr

Website See all products

PROTACT GMBH

Germany

Design and manufacture of automation systems for industrial valves. We design and manufacture individual automation systems for industrial valves in the process industry, working with our customers mainly comprising original equipment and plant manufacturers. The product range includes pneumatic and electric actuators, auxiliary devices such as position controllers, limit position detectors and solenoid valves for installation on open/closed or control valves. For us as a company independent of the Group, expertise, short communication channels and customer focus and service are at the core of any good partnership, and guarantee optimal support for customers and users. Thanks to our highly motivated team, we strive to maintain consistently high quality in our work processes as well as our products and services, in order to meet the highest expectations of our demanding global customer base in terms of quality, cost-effectiveness and delivery readiness. Our portfolio: • Design of automation solutions for special applications • Automation service for valves • Selection and distribution of industrial valves • Design and production of complete valve systems • Electric or pneumatic swivel drives • Auxiliary components for swivel drives • Control valves and control production • Compressed air processing • Drive systems for open/closed or control valves

Website
ELTEN D.O.O.

Slovenia

We are a family company, which is already more than 30 years successfully engaged with the production of the signal and switching elements (flush buttons for electrical switch, mushroom head buttons, selector switches, monoblock pilot lights, pilot lights, joystick selector switches, plastic and metal enclousores for electronics, plastic and metal control and signal units, contact blocks, potentiometers ...) which are intended for management and control of electrical circuits – DC and AC. Some of our products can also correspond to some of the pneumatic valves. We cooperate with more foreign companies, which use our elements combined with pneumatic valves, such as Metal Work, Camozzi, Pse, Stampotecnica, Aignep … Our focus is quality and affordable prices and we continiously widen our partner network to enable our customer short delivery dates and easy access to our products. The elements are tested in SIQ Slovenia and comply with the following norms: (ROHS, REACH, UKCE).

See all products

Product recommendations

Germany

Germany

Netherlands

Poland

See more products

MCS HYDRAULIC&PNEUMATIC

Turkey

MCS Hydraulic&Pnematic provides solutions to our customers at mobile &industrial hydraulic&pneumatic systems. Our Some Solutions For Applications: -Lifting & Handling Vehicle -Tipper Truck & Trailer Applications -Recovery & Transport Vehicle -West Management Vehicle -Etc. MCS Hydraulic&Pnematic supplies following products: *Hydraulic Kits *Power Packs *Oil Tanks *Electrical & Hydraulic Winches *Hydraulic Cylinders *Hydraulic Pumps *PTO's *Control Valves *Hydraulic Scrap Grapples *Slew Drives *Wireless Control Kits *Spool Valves *Hydraulic Hoses *Hydraulic Fittings *Oil Tanks *Hydraulic Spare Parts *etc. Please Contact With Us For More Information.

See all products
ACG AUTOMATION CENTER GERMANY GMBH & CO. KG

Germany

Our motto is (valves + actuators)², meaning that a carefully selected range of high-quality solutions for everything related to valves and actuators is available to you at competitive prices from a single source. For example: Ball valves in all materials and all possible connections, either hand-operated or automated Needle valves with high-quality design Non-return valves in numerous different designs and materials Knife-gate valves, either hand-operated or automated Part-turn valve actuators, either pneumatic or electric Actuator accessories manufactured by us, such as limit switch boxes, solenoid valves, throttles and noise absorbers, installation kits and bars, adapters and reducer sleeves ALL ABOUT VALVES – EVERYTHING FROM A SINGLE SOURCE DO YOU NEED HELP WITH AUTOMATION? Send us your valves and/or actuators for automating. We will also manufacture installation kits for you if required, complete with accessories of your choosing or from our range.
PENER TURKEY

Turkey

We as Zhejiang Keli Vehicle Co., Ltd. are one of the biggest manufactories about pneumatic and hydraulic in China. We produce for trucks, trailers, buses, construction machines about Chinese, European, American and international commercial vehicles. Our contact office in Hangzhou city and our Global office in Istanbul city (Turkey). 5 product groups which we manufacture directly, as follows: 1-Air dryers (cartridge and complete with valves) 2-Air brake valves 3-Clutch servos 4-Cabin tilt pumps and cylinders 5-New energy products: Water pump for electric vehicles (OE project only) Some key notes: *100.000 sqm factory *1000 employee *90% OE manufacturing (most of them Chinese OE; Daimler Mercedes just OE customer in 2020) *10% Aftermarket producing in same product line and process with OE standards. Our range consist of the following items; Clutch master, Clutch booster, Foot brake valve, Multi circuit protection valve, Relay valve, Trailer brake valve, Load valve, Exhaust butterfly valve, Hand brake valve, Dryer assembly, Four circuit protection valve, Multi pass valve, Power Steering Pump, Master Cylinder, ECAS solenoid valve, Leveling valve, Two-way check valve, Distance sensor, Loosening valve, Leveling valve, Automatic drain valve, Double H valve, Air filter pressure, regulating valve, Separation switch, Electric pump controller, Cab cylinder, Hydraulic lock, Manual hydraulic pump, Flashlight pump, Manual hydraulic pump
MUCON

United Kingdom

Process Components Ltd is the only manufacturer and supplier of the Mucon product range of powder and bulk solids handling equipment. Mucon equipment has been used extensively in the bulk materials handling industries for over 60 years and in this time the company has built up an excellent reputation for product reliability, application knowledge and service. Mucon products are used world-wide due to their superb flow control of bulk solids in a wide variety of product applications. Mucon valves, discharge aids and level indicators are used in conjunction with a wide variety of machinery such as Hoppers, Silos, Sifters, Mixers, IBCs, Big Bag stations, Tablet Machines, and Blenders within the food processing, chemical, pharmaceutical, plastics, glass & ceramics, sand and cement. Mucon products offer the end user manual, electric or pneumatic actuation.Mucon products can also be produced to ATEX Cat. 1D / 2DFor further information contact us by telephone of via Mucon.com
SOLENOID VALVES (UK) LTD

United Kingdom

Solenoid Valves (UK) Ltd offers our customers a professional and personal service while guaranteeing great prices and only the best deals for solenoid valves and valve products. Our Solenoid Valves online store offers easy access to all your valve needs and offers everything from general purpose solenoid valves, brass; stainless steel and plastic solenoid valves for IP65 safe area and ATEX hazardous area protection. Other products include Pressure Reducing Valves, Pressure Sustaining Valves, Safety Pressure Relief Valves, Pilot Float Valves, Coaxial Valves, Air Filters Regulators and Lubricators, Pneumatic Solenoid and Mechanical Valves, Foot Suction Valves, Anti Water Hammer Valves, Silent Check Valves, Pneumatic Angle Seat Piston Valves, Air and electrically actuated valves etc to name but a few. We pride ourselves in offering, procuring and supplying a greater range of products than our competitors. We succeed in a competitive market because we provide a very personal service that even our large competitors are finding hard to beat. Our friendly customer service team at Solenoid Valves (UK) Ltd have many years of industry knowledge and can help our customers find the right valves and equipment for their needs.
ZPA PECKY A.S.

Czech Rep.

Machining components for automotive industry; Electric actuators and actuators complete with gears and valves; Foundry with castings from 0, 5 to 12, 500 kg; Anchorage systems for Stay cable bridge; Steel structures for Building construction; Winches, Frames, Crane arms, Sheaves for the Maritime industry; Machining blocks for large diesel engines and motor heads for ships, cogeneration units, compressors and power generators and so on. We can provide: Rotation and Non-rotational milling; Machining of rotational pieces; Gearing production; External grinding of rotational pieces; Metal sheet processing; Surface treatment, heat treatment. Furthermore, we weld parts made of aluminium, magnesium and structural steels. The magnesium alloy foundry has a capacity of 100 tons of cast material per year for the a automotive and aircraft industry, electrical and pneumatic tools. The assortment includes e.g. car wheel discs, engine block castings, gearbox block castings, castings for drilling machine
PROCESS VALVE SOLUTIONS UK

United Kingdom

Process Valve Solutions are one of the leading valve suppliers across the UK. As a leading supplier, we have a full UKAS ISO accreditation supplying products such as Ball, Butterfly, Gate, Globe, Check and Diaphragm valves along with Pneumatic and Electric actuators, Switchboxes and Positioners by world-class manufacturers into all sectors of the industry. We pride ourselves on holding established long-term relationships with all the major valve manufacturers. Combining this relationship with our experience, you can be assured that we will match your specific requirements with the perfect product. Should you not be able to find the perfect match to your needs, we as valve suppliers have the expertise to be able to have such items custom-built and tested; achieving all ‘British Standards’ marks of approval.
MÉCA-FLUID

Belgium

Méca-Fluid supplies equipment for controlling and managing all types of fluids. Our initial business was to make prototypes of automated machinery, but very quickly it became three distinct but complementary branches. By the eve of the new millennium, 3 business lines stood out within Méca-Fluid: Studies, engineering and trade; workshop design, construction and repairs; on-site installations, renovation and maintenance. These 3 business lines concern precise fields in which we are specialists: Industrial valves (manual, pneumatically and electrically motorised); pneumatic components (actuators, air purification, …) and compressed air networks. Hydraulic equipment and instruments.

END-ARMATUREN GMBH & CO KG

Germany

Since 1980, END-Armaturen GmbH & Co. KG has been a reliable partner in designing, producing and distributing sophisticated industrial pipework and valves with mechanical precision, and sophisticated, innovative control technology. We are recognised as a reliable producer and distributer, offering a wide variety of products. Our products include: Shut-off valves, electrical swivel transmissions, pneumatic swivel transmissions, steel ball valves, valves, strainers (valves), ball valves
BILKONSIS

Turkey

Bilkon designs, manufactures, installs, and maintains mechanical and electrical systems. Bilkon offers high-quality bulk scales, impact flow meters, bagging scales, elevators, screws, and pneumatic conveying systems components for smooth product handling. Our specialties: Flour Mill, Seed Processing, Process Automation, Bulk Bag Handling, Open Mouth Bag Handling, Valve Bag Processing, Product Conveying, and Packaging Equipment
ESVAN VANA SAN. TIC. LTD. ŞTI.

Turkey

Esvan Vana, located in Istanbul, Turkey, has been manufacturing industrial valves for 40 years. Specialized in control valves, diaphragm valves, pressure reducers, hot oil valves, pinch valves; we are also manufacturing actuators, pneumatic and smart electrical.
PROCESS VALVE SOLUTIONS

United Kingdom

Process Valve Solutions are one of the leading valve suppliers across the UK. As a leading supplier, we have a full UKAS ISO accreditation supplying products such as Ball, Butterfly, Gate, Globe, Check and Diaphragm valves along with Pneumatic and Electric actuators, Switchboxes and Positioners by world-class manufacturers into all sectors of the industry.
HO-MATIC AG

Switzerland

If you are looking for valves and accessories for controlling a wide range of media, you have come to the right place at HO-Matic AG. Since our company was founded in 1977, we have specialised in the control of gases and fluids, as well as abrasive materials. Alongside close cooperation with internationally renowned suppliers of a range of different valves, such as ROSS EUROPA GmbH or Buschjost Magnetventile GmbH & Co. KG, HO-Matic AG has developed its very own product – the HOmatic pinch valve. It is now extremely popular with customers on all continents for solving a wide range of control problems. Our many years of experience in the field of valve technology and the high quality standards of our products mean that we are able to transform customer wishes into impressive technical solutions. Our products include: Regulating valves for pipelines; Pinch valves; Shut-off valves; Compressed-air control valves and much more

Website See all products
PETER HIRT GMBH

Switzerland

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

Website
LUTENA VAKUUM GMBH

Germany

Manufacture and sales of vacuum conveyor systems for industrial applications, system solutions and special filter technology. Complete with pneumatic components and control systems. Other products include: Automation technology, pneumatic connectors, vacuum conveyors, vacuum components, vacuum technology, compressed-air components, fine particle filters, coarse particle filters.

Website
SCHUBERT & SALZER CONTROL SYSTEMS GMBH

Germany

Schubert & Salzer Control Systems is a fast-growing high-tech company that develops, manufactures and distributes high-precision control and shut-off valves for industrial use in process engineering methods. Our valves are among the most efficient products on the market in terms of energy consumption, service life and noise generation. Their compact design and high level of control accuracy minimise installation and maintenance work while ensuring a high level of operating and process safety across extremely long service lives. Schubert & Salzer Control Systems GmbH is based in Ingolstadt in south eastern Germany and provides customers with "Made in Germany" high-quality products either directly or via our subsidiaries in Belgium, the Netherlands, Luxembourg, the United Kingdom, France, India and the USA, as well as over 40 Schubert & Salzer partners all around the world.

All the products for "electric and pneumatic valves"

Type 7310 – Angle Seat Motor Valve

Type 7232 – Flanged Motor Valve

Type 7080 – Three-way Valve Made From Bronze

Type 8044 – Sliding Gate Control Valve

Type 8035 – Sliding Gate Motor Valve With Spring Return_type 8035 – Gs1

Website See all products
KENDRION KUHNKE AUTOMATION GMBH

Germany

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

All the products for "electric and pneumatic valves"

High Power Linear Solenoid RM26

Bistable optical shutter CDR030

Solenoid Door Lock, Active-Locked (AL)

Advanced optical shutter

Power Pinch Valve PPV 7

Website See all products
HAAG + ZEISSLER MASCHINENELEMENTE GMBH

Germany

HAAG + ZEISSLER is a high-tech firm with more than 40 years’ experience. Over the years, we have developed into one of the leading manufacturers of rotating assemblies and piping joints – always focussing on the global market. Thanks to our outstanding technical expertise, high product quality (Made in Germany) and solid experience, we distribute solutions tailored to the challenges faced by our customers. Our goals: 100% customer satisfaction, 0% error rate and the best possible service. We design, develop and produce rotating assemblies and piping joints for the mechanical, chemical, electrical, pharmaceutical and steel industries, to name only a few examples of the fields of application. Our products are suitable for both warm and cold water, steam, heat transfer oil, hydraulic oil, compressed air, different gases, cooling lubricant, vacuum and many other media.

Website See all products