Leak detectors - Import export

Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible

Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design

Lite version - 1-channel application only - Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, long-life version

The WBT01 workshop battery test system is used to detect or localise leaks in vehicle drive batteries. The device is currently available in three versions: - for overpressure type WBT01-AF - for vacuum type WBT01-BF - combined for positive/negative pressure of type WBT01-ABF

Whether your products are flexible or rigid, liquid or solid, the SpeedAir 3050 can swiftly and accurately test them all. With testing times as short as 30-45 seconds, it delivers results you can rely on, ensuring the integrity of your pharmaceutical containers. The SpeedAir 3050 is suitable for a wide variety of pharmaceutical products, including but not limited to: Ampoules Autoinjectors Bottles Cartridges Flexible bags (IV Bags, pouches, etc.) Syringes Vials

In order to ensure that castings, valves, pumps, hoses and other components or groups have been manufactured free of leakage, they are tested in non-destructive leakage tests. Oxygen, air, nitrogen or sulfur hexafluoride (SF6) can be used as the test medium.

SDT ULTRAChecker is an ultrasound solution designed to use the full range of both airborne and structure-borne 2nd generation ultrasound sensors. Versatile The SDT ULTRAChecker covers all airborne and structure-borne ultrasound applications. Connect any SDT 2nd generation ultrasound sensor. ULTRAChecker delivers end-to-end reliability through the 8 application pillars of ultrasound. Simple ULTRAChecker is the easiest to use detector we’ve ever created. Every push on its simple, 4-button keypad is displayed on its clear, colour display. Increase or decrease signal amplification while maintaining safe listening levels through volume-controlled headphones. Affordable Air leaks, over-greased bearings, failed steam traps, electrical faults, passing valves, the ULTRAChecker finds them all. Built with SDT quality, it’s offered at a price that will leave you speechless.

In order to guarantee that components such as valves, pumps, hoses and other components or component groups are free from leakage, leakage measurements are carried out. We offer leakage test benches for different pressure ranges in both the low and high pressure range.

1.Standard Equipment DP1 Valve Leak Detector including a set of seven adapter plates, a flexible extension hose and a sturdy storage case. 2. Working Principle Applying an air pressure of about 6 bar to the DP1 Valve Leak Detector results in a max. vacuum of about 850 mbar which is applied via an adapter plate to the inlet or exhaust port of the cylinder head to check the respective valve for leakage. The vacuum gauge at the DP 1 indicates the tightness of the valve.

Package Leak Detection system using a water-based bubble test. LEAK-MASTER® EASY allows the detection even of the smallest of leaks. After the package is placed into the chamber filled with water, the head space above the water level is evacuated using a venturi vacuum (compressed-air) system. This causes the package immersed in the water to inflate, allowing any leaks and their location to be identified by a stream of bubbles. Benefits: economical and uncomplicated visual inspection allows localisation of the leak for all flexible and rigid kinds of packaging (food-, pharmaceutical-, industrial- and other packaging) short testing period (< 30 sec.) easy-to-use intuitive operation – no special skills required easy installation and start-up no trace gas required in package can also be used for altitude simulation optionally also for vacuum packaging, set order-No. 956992700 no calibration required various chamber sizes avail

Syntax has standardised technical solutions and experience to create custom-built components or adapt them for every type of application

The T9731 is specifically designed for measure the adequate air flow rate in complete adherence to the standard EN 14683 for surgical masks testing. As shown in diagram C.1 on page 12 of the standard EN14683 , the instrument is equipped with two air flow meters of type Mass-flow with scales 0.0...20.0 nLitres/minute (2.12 of diagram - point C.2.1) servo driven valve controlled from the software (10 of the diagram - point C.2.4), and a double gauge / differential pressure measurement (M1 and M2) as expressly indicated in point C.2.2 . In order to comply with both the ISO accreditation standards and the expectations of the reference standard, the pressure measurements in “Differential" mode (or pressure drop) occurs in Pa or Pa/cm2 in case the sample area is set in the menu TST with area different from 1.00 cm2. The connecting "short form" attached to the manuals providesconnection to an external vacuum pump (C.2.3), not provided.

This equipment was developed to test watertight function in grommet using an air pressurized chamber to simulate real conditions of water pressure applied to grommet, without destroying or causing damage to the electrical harness wires. It includes a workbench with a sealed chamber and an electrical cabinet with interface and control device. Features: - Different types of chambers available: Acrylic or Inox - Different chambers sizes available - Multi chambers available with optional independent chambers test - Exchangeable test plates, allowing to test several grommets in the same equipment by exchanging the test plates only - PLC e HMI – Interface and control - Test by: pressure; vacuum; pressure & vacuum; or pressure & water for visual inspection - Tests up to 500 mbar - Scanner, printer and RFID integration - Adjustable test parameters (test pressure, min pressure, time limit, etc) - Tests results statistics - User ID

Cygnus ultrasonic hatch cover weathertightness tester has been ABS type approved and accepted by P & I clubs. This ultrasonic hatch cover testing device is used to perform quick and effective evaluation of cargo hold hatch covers and door seals to determine water leaks and weathertightness. This ultrasonic leak detection system allows inspections to be carried out with cargo in place or in subzero temeprature, replacing traditional and unreliable methods such as hose testing. The Cygnus Hatch Sure system comprises of 2 parts a battery powered transmitter containing 19 ultrasound emitters (40 kHz) which are arranged to produce an omnidirectional sound field uniformly distributed throughout the cargo hold; and a receiver which displays the sound energy level that passes through gaps in the enclosed cargo hold to enable the location of leaks to be quickly and accurately identified.

Reducing your energy costs is a difficult challenge faced by many industries in today’s economy. But, it doesn’t have to be. Undetected air or steam leaks, bearing failures and electrical panel faults cost you real money. There’s a way to cut these extra expenses from your energy bill. Preserve the health of your assets with the SDT200 ultrasound detector. Hear air leaks, trend and monitor the condition of your bearings, safely inspect electrical panels and schedule repairs on your own terms, long before they shut you down – all with ultrasound technology.