Compression machines - Import export

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!

This robust, vertical installation machine is specifically designed to install Compression Limiters into a variety of plastic components. The machine is available in two models: the CL1000 is capable of 4.4 kN (or 1,000 lbs.) of installation force and the CL2000 is capable of 8.8 kN (or 2,000 lbs. of installation force, and is available with multiple installation tips in nearly any configuration at various elevations. The incorporation of a touchscreen operator interface machines makes our machines easy to use and customisable. Language conversion is easily executed to support international use. The Model CL is equipped with installation verification to ensure that the machine has completed a full installation cycle and a Compression Limiter was installed at each location. This highly flexible platen style machine with 228mm x 279mm (9" x 11") working area. The Model CL is available with optional enhancement features for error-proofing and maximum efficiency.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

A fuel injection systems manufacturer used two steel brackets to clamp the fuel rail to the top of the engine. The customer was looking at changing these brackets to plastic to reduce costs. In order to prevent deformation of the plastic bracket during the tightening of the bolt, a Compression Limiter was required. The customer originally investigated the use of a machined Compression Limiter, but the savings from changing the metal bracket to plastic would have been lost considering the high price of the machined Limiter. The customer approached SPIROL to help provide a lower cost solution for the Compression Limiter. SPIROL recommended the use of a standard CL200 Compression Limiter based on the rated proof load of the bolt used in the assembly. This roll-formed Compression Limiter is a fraction of the cost of a machined Compression Limiter. In addition, the flexibility of the roll formed Limiter enabled the customer to widen their hole tolerances further reducing assembly costs.

SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.

The NEW TWIST SE 120 is the tying system with wire twistband most innovative and affordable on the market. Unlike the other models uses a non-reciprocating motion mechanism that eliminates the wire jams and allows the use of only 76 mm of wire for tying, saving about 25% of consumables. For its characteristics the machine is suitable for each type of application for bakery and confectionery products for example cookies or chocolates. Besides being very silent it can be used wherever compressed air machines cause problems of noise and pollution. Use gold wire twistband (plastic tape with the central metal core) which is automatically wrapped around the bag creating a robust closure but easy to open.

Our type REB axial forming machines, with their compression power of up to 287,000 lbs, are particularly well-suited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit, they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step user-friendly and fully programmable. We offer the option to equip our systems with electric or hydraulic-numerical drives. These forming processes can be completed stepwise in transfer systems to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

REB 420 - for tube-Ø from 4-20 mm Our type REB axial forming machines, with their compression power of up to 287,000 lbs, are particularly well-suited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit, they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step user-friendly and fully programmable. We offer the option to equip our systems with electric or hydraulic-numerical drives. These forming processes can be completed stepwise in transfer systems to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

REB 660- for tube-Ø 6 - 60 mm Our type REB axial forming machines, with their compression power of up to 287,000 lbs, are particularly well-suited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit, they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step user-friendly and fully programmable. We offer the option to equip our systems with electric or hydraulic-numerical drives. These forming processes can be completed stepwise in transfer systems to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

Accurate forming with fast tool change. Our type REB axial t form forming machines, with their compression power of up to 1,300 kN are particularly wellsuited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step userfriendly and fully programmable individually. We offer the option to equip our systems with electric or hydraulicnumerical drives. These forming processes can be completed stepwise in transfer system to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

REB 645 - for tube-Ø 6 - 45 mm Our type REB axial forming machines, with their compression power of up to 287,000 lbs, are particularly well-suited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit, they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step user-friendly and fully programmable. We offer the option to equip our systems with electric or hydraulic-numerical drives. These forming processes can be completed stepwise in transfer systems to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

Particular features of the machine Different demolding possibilities the mold can be opened automatically, possible infeed/outfeed of the lower mould half or rail system. Upper and lower ejectors for the full kNockout of the molded parts. Adjustable inclination of the top platen. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould.

TYC 22 Press The French company DubourgelGrange is renowned for the quality of its sanitary product range. The factory has fully automated "REP Tung Yu" machinery equipped with handling units and robots (loading and unloading), which operate in 3 shifts for the major part 7 days a week. These machines are used to produce highend toilet covers and seats made in thermoset resin (ureaformaldehyde).

The TYC2RT compression press allows the production of rubber mouldings with compression moulding or vacuum compression. The twoplate in/out with 45° inclination of the upper plate is suitable for various options. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould. Equipped with a 4post clamping system with high precision parallelism, their adjustable opening stroke allows different mould heights. The vacuum bell system reduces the curing time, thus increasing productivity.

Machine features Top Closing. Specific pressure 600 kg/cm². Safety light curtain, double hand control. Available in single and doubledeck versions.

Machine features Specific pressure 500 kg/cm². Dimensions of the heating platens 1500 x 1500 mm. Minimum mould closing speed 0.03 mm/sec.

Junta Polymers offers you a wide range of rubber molded parts. Our specialized machines for compression or injection can produce every possible shape in VMQ (silicone), EPDM, NBR, CR, FKM or SBR rubber molded parts.

Mining machinery and equipment is mainly used for mining operations. But, at present, it is widely used not only in the mining industry but also in such industries as metallurgy, mechanical engineering, energy, chemical industry, etc. If we talk about the classification of mining equipment, it is divided into mine, quarry, mineral processing, and transport equipment. A list of the equipment used in the mining and mineral processing industry is extremely large, it is boring machines, machines, and systems for underground mining; mining systems and automatics; mining machines and systems for open mining operations; jetting means mining operations; transport machines; machine mine water, ventilation and compressed air systems; machine mine hoist and others. We manufacture: Electric Pulling Winches Electric Scraper Winches Bottom Dump Muck Cars Rocker Dump Muck Cars Air Mucking Machines Electric Mucking Machines

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

Details wall-mounted extraction with deflector profiles to increase filtering efficiency; easily removable for fast maintenance inside machine main structure formed by self-supporting galvanized panels with non-cutting edges lv control panel wired with flame-retardant cable atex lighting extractor with belt traction system high efficiency, antistatic, aluminum coated polyester filtering cartridges automatic compressed air filter cleaning system by detecting clogging of cartridges compressed air storage tank inside machine internal dust collection drawers deflectors inside machine to facilitate air conveying and dust collection in drawers Optional: dust extraction station with insulated paneling and, if necessary, wall-mounted filtration for air introduction

Details extraction using horizontal work surface, scratchproof thanks to felt cladding main structure formed by self-supporting galvanized panels with non-cutting edges low control panel wired with flame-retardant cable extractor with belt traction system high efficiency, antistatic, aluminum coated polyester filtering cartridge compressed air filter cleaning system with manual operation compressed air storage tank inside machine internal dust collection drawers deflectors inside machine to facilitate air conveying and dust collection in drawers rear vertical walls Optional: vertical wall behind extractor and/or which can be tilted rubber wheels for easy movement

Compact - minimal compression: With its new designed geometry microFIN feather elements interlock with the bellow elements. This enables the whole construction to achieve a compression of 2,4 mm per lamella. In comparison to regular bellows which have a relatively high compression rate, the whole machine stroke can be greatly enlarged. Anti-Scratch: With its unique coating at the bottom of each fin (lamella), scratching is prevented and the lifetime of the cover is increased significant (up to 70%). Additionally it increases the tightness against coolants and chips. (available for lamellas up to 1500 mm width) Exchange: Each lamella is removable from the bellow - corpus without disassembly of the whole cover systems. This is achieved by a plug connection between corpus lamella and protection lamella. Damaged lamellas can be removed easily and cost-effective. Fabric: Due to its modular construction, an additional fabric can be added to the cover system.

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 20-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 7 mm is possible in NE metals and a chamfer width of up to 4mm in steel. In addition to this, a radius processing of 1.2mm and 2.5mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The processing of drill holes is already possible starting at a diameter of >20mm.

The SMA 50-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 20 mm is possible in NE metals and a chamfer width of up to 15mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm.

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE metals and a chamfer width of up to 12mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.