Coupling screws - Import export

Set Rolled Rim Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your rolled rim grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for rolled rim grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Sheet Metal Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your sheet metal grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The dies first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for sheet metal grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Set Self Piercing Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your self piercing grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for self piercing grommets. √ These dies are compatible with Stimpson and Scovill grommets.

At Micron, we manufacture quality. These dies are made of stainless steel and come in a two piece set. 25mm Jean/Tack Button Dies are compatible with TEP 1,TEP 3 DEP 2, PL 10, M 3 and MC 20 fastener attaching machines. Top Dies shaft is ¼” threaded.

Micron’s high quality hole piercing dies are only compatible with the M 3, DEP 2, PL 10 and MC 20 fastener attaching machines. Perfect for pre punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.

Micron’s high quality hole piercing dies are only compatible with the M 3, DEP 2, PL 10 and MC 20 fastener attaching machines. Perfect for pre punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.

A special kind of #3 self piercing grommet dies specifically designed to be used with only the Micron H 1 Portable Hand Plier.

This #15 cutting die measures 2″(48mm) and is intended to be used prior to installing our #15 – 2 inch curtain grommets to perfectly punch holes. Specifically used with spandex/lycra fabrics. Top shaft is 5/8” smooth. These dies sets are designed to be used with Micron M 3 fastener attaching machine and the MC 20 double cylinder fastener attaching machine. Each cutting dies comes with a white Teflon cutting board to protect the blade from dulling.

This #15 cutting dies measures 2″ (44 mm) and is intended to be used prior to installing our #15 – 2 inch curtain grommets to punch holes. Specifically used with spandex/lycra fabrics. Top shaft is 5/8” smooth. These dies sets are designed to be used with Micron M 3 fastener attaching machine and the MC 20 double cylinder fastener attaching machine. Each cutting dies comes with a white Teflon cutting board to protect the blade from dulling.

A special kind of 15mm ring snap dies specifically designed to be used with only the Micron H 1 Portable Hand Plier.

At Micron, we manufacture quality. These dies are made of stainless steel and come in a two piece set. 14mm Rhinestone/ Jean button Dies are compatible with TEP 1,TEP 3 DEP 2, PL 10, M 3 and MC 20 fastener attaching machines. Top Dies shaft is ¼” threaded.

Micron hand tools are made of high quality stainless steel material. This 4 piece kit contains the cutter and Teflon cutting board used to pre punch the material and the 2 piece setting dies. Specially built to set Stimpson A 670 oblong grommets.

Micron hand tools are made of high quality stainless steel material. This 4 piece kit contains the cutter and Teflon cutting board used to pre punch the material and the 2 piece setting dies. Specially built to set Stimpson A 671 oblong grommets.

Micron hand tools are made of high quality stainless steel material. This 4 piece kit contains the cutter and Teflon cutting board used to pre punch the material and the 2 piece setting dies. Specially built to set M 700 oblong grommets.

Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal grommets and teeth washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal and plain washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal and plain washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material and allows you to install your curtain grommets with ease. Recommended to be used with a rubber mallet to avoid damage to your hand tool. Your hand tool 4pcs sets Includes 2pcs setting , 1pcs cutter and 1pcs cutting Teflon board.

Micron hand tools are made of high quality stainless steel material, allows you to install your Rolled Rim Grommets & Spur Washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material, allows you to install your curtain grommets easily. Remember to use a rubber mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material, allows you to install your Rolled Rim Grommets & Spur Washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material and allows you to install your curtain grommets with ease. Recommended to be used with a rubber mallet to avoid damage to your hand tool.

Micron hand tools are made of high quality stainless steel material, allows you to install your curtain grommets easily. Remember to use a rubber mallet, not a steel hammer. Supplied with full instructions.

Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal grommets and teeth washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.

Quickrelease couplings for water pipes, oil lines, brake and clutch lines. The quickrelease couplings are always used when a very fast installation and removal of services is required. Areas of application are motorsport and aviation.

Worm screws, gear wheels, slide rails and other technical mouldings are today made of engineering plastics such as POM (polyoxymethylene), PA (polyamide) or PE (polyethylene). These materials with different property profiles (negative high water absorption with PA, poorer wear behaviour with PE) are supplied as sheets or rods. The required moulded parts are then produced by mechanical processing (turning, milling etc.) in a more or less complex manner. Effective injection moulding is only worthwhile for large quantities together with small component sizes, otherwise the high tool costs cannot be amortized. secutexTechno is characterised by high hardness (70° Shore D) and rigidity over a wide temperature range. It retains its high toughness down to 30 °C, has a high abrasion resistance and a low coefficient of friction. The intrinsic colour is yellow, making it well suited for technical applications. Mechanical processing is simple and comparable with other hard plastics.

Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and as fastening nuts. Not advised for use with motorised drives due to the steelsteel material combination. Gunmetal nuts for motion drives with low and medium speed. By insufficient lubrication, gunmetal trapezoidal thread nuts on steel spindles have good dryrunning properties. Plastic nuts for lownoise motion drives. Good dryrunning properties. Tolerance class 7H.

Universal joints with plain bearing can be swivelled by 45°. Max. transferable torque (Nm) at 150 rpm, operation angle α < 5°. * Bore depth is less than by DIN 808.

Keyless locking coupling with low mass and moment of inertia. Easy to connect and release – no jamming on the shaft. Perfect for zero backlash connections. Excellent concentricity and running. Suitable for keyed and keyless shafts. for shaft diameters from 5 to 35 mm for high torques minimum axial offset when mounting selfcentring Assembly Shaft and hub must be free of oil, grease and dirt. Do not lubricate keyless locking coupling. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten nut by hand and use a torque wrench to tighten to the defined tightening torque. Tolerances Shaft diameter and hub hole Form A ±0.04 mm. Form B ±0.08 mm. Surface quality Rz ≤ 16 µm.