Metal coating - Import export

In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic, higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.

An innovation for decorative applications is the stripe coating on our narrow Coil Coating line at First American. This is a complete coil coating process in which we are able to leave tightly toleranced, unpainted stripes on the carrier strip. These give the decorative effect to the finished article, while the coated areas are coated with an adhesive system (e.g. automotive trim material or white coating with a defined black stripe, etc.). As always, all metal strips available on the market can be used as metal carriers; all coatings can also be used. This leads to a smart product, allowing you a multitude of new, innovative applications.

Our rubber-coated metal strips are used in numerous applications, such as engine and aggregate seals. In addition to NBR, we also coat metal strip with EPDM, NR, HNBR and FPM in thicknesses of 10 μm - 2 mm. The metal strips can also be coated with an anti-friction coating, which offers extremely high resistance to heat and special sliding ability. The resulting further processing quality enables them to be used wherever parts made of metal strip with sealing, sound-absorbing or vibration-damping properties are required. The very good bonding between elastomer and metal, combined with outstanding deep-drawing properties, shows the superiority of this coating. The metal strips can also be top-coated with decorative lacquers on both the metal and the rubber coated side (e.g. as a distinguishing feature in the company's own production for top and bottom sides).

The processing of granules into coated long products requires high precision with tools and machine settings as well as sound expertise in the specific characteristics of the materials. As an extrusion specialist of steel cables and other long products such as wires, glass-fibre rods, we offer a wide service range: Plastic coating from ca. 0.5 to 24mm, PA, PE, PP, PUR and PVC and more, additives for special requirements, such as the UV and water resistance, circular cross sections and special dimensions and stock colours or your own selection.

rotating spindle coating machine for larger quantities or longer process times

rotating spindle machine for coating rotationally symmetrical parts

Metallic thinfilm systems are vaporized onto substrates to attain specific reflection and transmission values. Depending on the type of metal and the thickness of the layer, metallic splitter coatings are able to separate customerspecific wavelength areas.

Metallic reflection coatings enhance reflection and are used in many optical instruments for light deflection. We coat glass, metal and plastic. The choice of coating material depends on the reflection requirements in the defined wavelength range. We use aluminium, gold, silver and chromenickel, either with or without protection coating for the VIS, UV and IR ranges.

In coil coating, an organic coating is applied to the surface of a metal strip in a continuous process. The HUEHOCO portfolio includes both decorative and weather-resistant coatings as well as system solutions for a firm bonding of the metal strip with various rubber compounds and/or various plastics. For technical applications, there are also high-temperature resistant and non-stick as well as anti-friction systems, directly rubber- or plastic-coated metal strips. Since 1989 we have been the first company in the world to offer our customers the opportunity to have their goods delivered "endlessly" wound with more than 200,000 metres in a single strip on metal or plastic spools. Depending on our customers' requirements, we can process all wrought aluminium alloys, stainless steels, steel grades and non-ferrous metals available on the market in various degrees of hardness.

Functional and decorative coating systems In addition to coatings for Coil Coating applications and related areas, SI-Coatings GmbH develops and produces individual paints and varnishes for any application. These are technical, functional and decorative coatings.

This coating system is mainly used for the coating of cold rolled strip, but can also be applied to other metals. It is applied in the last processing step and enables a special gliding ability and heat resistance on coated surfaces.

Rubber-to-metal bonding Our adhesive build-up provides strong bonding between our metal carrier and your rubber. With our know-how, we are able to bond a wide variety of compounds such as NBR, CR, EPDM, SBR etc. for you. Plastic-to-metal bonding Whether PC (polycarbonate), PVC (polyvinyl chloride), ABS (acrylonitrile-butadiene-styrene), CAB (cellulose acetobutryate), PP (polypropylene), TPU (thermoplastic polyurethane), PA (polyamide) and polyolefinic plastics or other thermoplastics as well as duroplastics - we ensure that you achieve optimum adhesion between the plastic and our metal carrier.

We are able to produce various shades of high-quality decorative polyester top coats in small and very small batches using a paste system – resulting in a very competitive pricing for our customers.

Unlike metallic splitter coatings, dielectric splitter coatings enable absorptionfree light conditions. Dielectric splitter coatings are used in various filters and particularly in laser technology and reference metrology.

Compared with conventional metallic reflection coatings, the advantages of dielectric reflection coatings are their climate resistance, mechanical stability and high reflection combined with relatively low absorption. These properties are crucially important for many optical applications involving extreme thermal and mechanical stress.

Kullen Koti End, Cup and Bevel brushes give a gleaming finish to oxidised or coated metal surfaces. They are all-rounders in drilling machines, on angle grinders and in machining centres, performing such tasks as removing paint, scale and corrosion. They are also ideal for use in places which are difficult to get at, and were specially developed for the processing of edges and corners.

Base plate made of metal, black powder-coated, chrome-plated stand tube - ectendable from 320 - 620 mm - with poster frame and T-piece made of sturdy plastic.

WIWOX® EK White fused alumina blasting abrasives are used in many areas due to their extreme purity and hardness. From sophisticated medical technology through the roughening of metals to the subsequent coating. Available as white fused alumina in sharp-edged or angular grain shape as well as micro-grain with a precise grain distribution up to 3 μm.

The original design of this practical table means that it can be stored and transported using the least amount of space. When in use, it can be set to two different heights: a) with one 720 mm pole as a table to sit at, b) with 2 poles with total height of 1200 mm as a bistro table to stand at. The poles that are not required, are held tidily in a bracket under the tabletop. The table has chrome plated poles, a sturdy powder coated metal welded base and a Werzalit tabletop (diameter: 700 mm). Despite its sturdiness, it only weighs 13.5 kg, is easy to move and no tools are required for assembly.Ideal for use in catering or at parties, exhibitions and other events.

Our special ability lies in the processing of metal strips pre-coated with adhesives. With this material it is particularly important not to damage the surface mechanically whilst at the same time not to impair the ability to bond. This skill enables us to supply stamped parts for bonding with rubber and/or thermoplastics, such as Vibration damping elements spring elements stabilizers functional parts components We guarantee a functional workability of the product for 6 months after delivery.

In its sensor housing, the combiSENSOR combines two displacement sensors. This unique sensor concept enables one-sided thickness measurement of electrically non-conductive materials on metallic objects. Its field of application is the thickness measurement of plastic film or of plastic coating on metal plates. The eddy current sensor penetrates the plastic layer and measures the distance to a metallic material underneath it, e.g. a metal plate. The capacitive sensor synchronously detects the distance to the plastic material. The thickness is determined based on the difference of both sensor signals.

The deflection and separation of light beams in different intensities, directions or wavelength ranges can also be controlled by thinfilm vaporization. Either a metallic or a dielectric coating is chosen, depending on requirements and application. The abovementioned advantages of dielectric reflection coatings play a decisive role here, too.

profix® dispenser box holder For our nonwovens in the handy dispenser box we now provide a suitable holder made of plastic-coated, silver-coloured metal. The holder is very solid and provides safe and tight fit to the dispenser box.

Electroplated metal surfaces are found in all areas of daily life and are used not only for technical purposes but also for decorative ones. For this, metallic coatings made of copper, nickel, nickel alloys, chrome, silver, and gold are used, which can offer both a matte and a high-gloss appearance. The most common application areas for decorative surfaces are found in the automotive industry, in sanitary areas for items such as fittings, but also in the consumer goods industry, thus combining functionality with appealing aesthetics.

The EM ACE600 sputter coater is a versatile high vacuum film deposition instrument for your FE-SEM and TEM applications. Whether you need to •enhance contrast by a fine-grained metal layer, •produce nanometer thin but robust carbon films, •rotary shadow your sample to make smallest features visible, or to •move into cryo-coating, the ACE600 coater will offer the optimal solution to see more, and this every time.

KB RollerTech processes seamless metal belts (stainless steel and nickel). Compared to coated plastic belts, metal belts offer the following advantages: very high thermal conductivity very high physical stability Today, KB RollerTech processes metal belts with the following properties: Properties Nickel belts Stainless steel belts Length < 350 mm < 400 mm Diameter 15 - 50 mm 10 - 100 mm Wall thickness 30 - 500 µm 35 - 100 µm Geometry straight straight and concave Remarks 100 mm diameter only possible with seam Concerning the coatings the following combinations are possible: Nickel belts Stainless steel belts PFA sleeves PFA spray coatings or PFA sleeves Silicone and PFA sleeves Silione and PFA spray coatings or PFA sleeve

Diversity meets experience Surface treating and coating processes are just as numerous as they are diverse. We develop customtailored systems for almost any application, taking into account customer process specifications: Electroplating and chemical coating of metal component Electroplating and chemical coating of plastic components Aqueous cleaning of metal components Cathodic dip coating Electropolishing stainless steel and copper components Etching and staining metal components Etching glass and ceramic

Wherever waste disposal should be organised as simple and hygienic as possible oecoständer provides helpful services. Whether outside or inside, on events, assembly or building sites, oecoständer is quickly set up and directly operational. Up to 6 stands can be set up together in a line and compose a collecting station; special combination clips are already included in delivery. 6 different lid colours are available to better distinguish every single fraction. ■solid construction (light metal coated tube) ■simple assembling (connector system) ■high capacity: 70 l bag ■hygienic plastic flap lid ■small place requirement (0,16 m2) ■space-saving storage (folded up) ■extendable ■low weight (about 1,9 kg) Rubbish and recyclable bags made of plastic are available for a simple, clean and hygienic disposal. The bags can be quickly and easily fixed with the stretching frame. 60/70 l bags standard version includes holder, stretching frame and flap lid.