Industrial vehicles - Import export

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.

Due to its construction and suction plate form this panel suction system can be employed for both wall and roof panels It can be adjusted to fit the individual panel forms and profiles. By the deployment of extension arms even very long panels can also be safely and stabily transported.

Vacuum lifting devices for curved panes, concave and convex, inner and outer radius from 450 mm of up to 6000 kg for sale or hire. Also for wavy panes available.

Heavydrive®'s special rubber compound keeps the suction pads soft and flexible at temperatures below zero, just like snow tyres. This way, they can be used at temperatures as low as -20°C.

These extremely long and thin panes require special suction systems. Heavydrive® offers these suction systems in a wide range of sizes and loading capacities.

You are planning a facade assembly with our overhead rail transport system and you would like guidance or you have any questions?

Our assembly lifts are ingenious - with a max. lift height of 7.9 m, it helps to safely manoeuvre loads of up to 500 kg. One of the decisive advantages of this assembly lift is that, during glass pane assembly, the vacuum suction cups can be driven to the facade without problems, as Heavydrive uses counter weights. With conventional lifts, for exhibition stand construction or sound engineering, the lifting carriage is underneath the lifted object. With our models, this would be disruptive. Last but not least, this practical all-rounder is folded by hand and, if needed, even fits into a car. It is hand driven and therefore requires hardly any servicing. Movable under a load of 500 kg.

Suction systems for flat glass with up to 14000 kg capacity. For the most part variable to fit pane size.

Our original Heavydrive glass transport wagons are easily collapsible and can be assembled again using only a few grips. Our special heavy load models with a lifting capacity of up to 1,000kg are secure due to a low centre of gravity, they guarantee optimal anti-slip security and can be adapted to different pane sizes. The new “AIR” product line uses pneumatic tyres for highly shock-absorbing transportation and is suitable for all terrain, including moving over paved surfaces. We have developed and manufactured these wagons and can manufacture custom requests to meet your demands!

The glass lifting device is an innovative solution for unloading, loading, transport, and fitting glass. One person can transport a glass panel weighing 80 kg. The device can be easily assembled and disassembled – it only weighs 35 kg. It has large 13 inch wheels which allow it to move on uneven surfaces. The wheelbase can be adjusted, which enables it to pass through doors and move on narrow pavements.

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

How do we improve the durability and performance of products? Through our production of heating mats for lithium-ion batteries and other batteries, we also indirectly contribute to the conservation of resources. In this way, the batteries are better protected against strong or fluctuating temperature influences. This means that they are less prone to failure and have a significantly longer service life and performance. Preheating, warm up or heating in continuous operation The heating mats are equipped with a performance tailored to the customer and regulate the temperature of the batteries and rechargeable batteries according to the necessary conditions. With optional equipment such as self-adhesive foil (one-sided or double-sided foil lamination), these can be attached to the battery or the block super easily. Application ✔️ in electric cars & hybrid vehicles ✔️ for electric commercial vehicles ✔️ for electric industrial trucks ✔️ other battery-powered industrial applications

Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.

These devices are suitabele for transportigng heavy loads of up to 1300 kg, overcoming obstacles such stairs, ramps and tailboards. Also for loads containing liquids such as fridges & co. Heavy loads (such as switch an server abinets, safes, boilers, parts of mchinery and systems, etc.) can therefore be delivered down or up stairs, even by a single person.

Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.

ALDEKON is Turkey's leading manufacturer of high-quality furniture

Water Pump for mixers.

The cutting principle of guillotine shears is the same as the cutting principle of hand shears. The force applied on the moving blade of two blades one of which is fixed and the other is movable cuts off the part between the blades. The cutting capacities are highly variable. Depending on these variations, the production dimensions are made differently. As Ramazan Aycan Inc., we provide you with guaranteed services regarding guillotine cutting with our expert staff. We perform the following cutting operations of iron-steel, aluminum and other metal sheet types. Metal cutting using guillotine shears for metal and furniture industry Metal cutting using guillotine shears for steel construction and construction industry Metal cutting using guillotine shears for the white goods industry Metal cutting using guillotine shears for the heating, ventilation and air-conditioning equipment industry.

Are stand-alone units that are not built-in for machines. This unit uses fluid to power a machine and transmit power from one location to another. It includes a reservoir of many different shapes and sizes, regulators, a pump, motor, pressure supply lines, and relief lines. Packages have multiple valve connections, which means they can operate a variety of machines using the appropriate valves. Mini power packs, on the other hand, are smaller in size and consist of a wide variety of simple mounts, making them extremely versatile. It offers a compact solution for a multitude of applications, often without the need for tube and reinforcement assembly. It is a functional design product with high performance gear pump and steel or plastic oil tank options. Special production on demand

We supply spare parts for all our bodies. We have most of the components in stock and are ready to send within a few days. Please let us know our body production number, part number in the catalog, or provide an accurate description of the part (producer, model, etc.) and, preferably, high-quality photos if the part is not in a spare parts catalogue.

ALL TYPES OF CLUTCH SERVOS

Farm tractors and harvesting combines

HODA, UAB produces plastic products for the vehicle manufacturing industry.

High visibility vest. Made from breathable and resistant ketten fabric, it includes two retro-reflective tapes sewn onto the torso and back that increase users' visibility. Clothing certified as high visibility category II PPE in accordance with standards 13688 and 20471, class 1. Wide, comfortable and cool V-neck with central full zip for greater durability. Ribbed cuffs and armholes to reinforce its structure. Personalization methods: embroidery and transfers Ideal for work clothes, uniforms and reflective vests for vehicles and industry.

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Small pitch for silent operation Protection for cables and tubes against chips (even hot chips) Rugged and tight Space-saving with good ratio of inner to outer dimensions Modular interior separation options Small pitch for low-noise, silent operation Very small radii possible through small pitch Smooth, chip-repellant exterior contour Removable lid for shortening the installation time Double stop dog system for longer unsupported lengths KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Materials handling Construction machinery Machine tools Timber Processing Machines Long travels in many industrial sectors Semiconductor ESD versions Theater and entertaining industry Vehicles General mechanical engineering etc. In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request