Joint - Import export

The central idea of high pressure tools is to concentrate the energy of a high pressure water jet at the smallest possible point to maximise its effect. The smaller the area to be sprayed, the slower the process will be on large areas. The solution is to move the high pressure water jet quickly and systematically. Rotating joints allow the water to be transferred from fixed to rotating parts of the high pressure tool so that the water jet is moved in a targeted manner. KAMAT rotary joints are suitable for pressures up to 4,000 bar. They can be driven by internal or external energy and can reach up to 3,000 revolutions per minute. For fatigue-free and safe working, we also offer easy-to-use swivels for high pressure hoses, suitable for our high pressure pumps. Also designed and manufactured in-house, these swivels are internally streamlined to minimise flow restrictions.

INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.

The Ozdekan EX are waterproof expansion joints that allow absorption of the deck movements. These joints are manufactured with rubber elements and restrained to the structure with proper anchor bolts. The reinforcing metal profiles made of steel are completely inserted and vulcanized to the rubber. This process is a total guarantee against corrosion and allows a longer life to the product. The rubber compound, too, has been intentionally formulated to resist the oil, grease, petrol, salt and sand, without besides, suffering premature ageing phenomena due to sun rays, salt and snow. All the joints follow the deformations and movements of the structure (the movement can exist with every skew angle from 0° to 90°) by shear deformation of the rubber elements. Anchor bolts, made of steel and protected with anticorrosion treatments, absorb the elastic reactions and all the other kind of mechanical solicitations. www.ozdekan.com

very fast curing, high flexibel, abrasion and UV stable surface protection for concrete

Maintains flexibility and lubrication of joints. Protects cartilage. Improves joint mobility. Prevent sports injuries such as tendinitis and muscle strains. Improves the appearance of the skin, nails and hair. 100% natural ingredients: Hydrolyzed collagen, bamboo extract (70% silicon), marine calcium, vitamin C (L-ascorbic acid), hyaluronic acid, marine magnesium, vitamin D3

Clamping joints are used to clamp round cross sections (bars, tubes, etc.) and are infinitely adjustable. The simple design together with the adjustable clamping lever permits rapid clamping.

Highquality stainless steel hose joints from HJS to be welded into the exhaust system yourself. With this hose joint you get a highquality and longlasting decoupling of the exhaust pipes.

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C water steam heat transfer oil air SPEED MAXIMUM 700 1/min NPT thread 1500 1/min ISO 228 thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

Universal joints for steering. The joints are maintenancefree and permanently lubricated.

Stainless steel 1.4305. Version: Bright

Universal joints with plain bearing can be swivelled by 45°. Max. transferable torque (Nm) at 150 rpm, operation angle α < 5°. * Bore depth is less than by DIN 808.

Expansion joints serve a crucial role in industrial ductwork by facilitating the controlled expansion and contraction of ducts. Their primary function is to accommodate thermal movements within the ductwork system. They mitigate thermally induced stresses by allowing thermal movements in a relatively unrestricted manner. Expansion joints contribute to the overall flexibility and structural integrity of the system which is essential in preventing the build-up of stress that could otherwise lead to damage in equipment, ductwork, and supporting structures.

Stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes dia. 32 mm.

Finger Joint Panel Material:Radiate Pine, paulownia, poplar wood type:100% KD Solid Wood Thickness:18mm, 22mm,33mm,45mm... Finishing: Natural Moisture: 8%-12% Function: construction, making wood moldings

Mouth opening: 22 – 18mm  Mouth opening: 19mm  Mouth opening: 19.5mm

Flexible connectors, rubber expansion joints, play a crucial role in absorbing movement, vibration, and noise within piping systems. These joints adeptly accommodate thermal expansion, contraction, and misalignment while steadfastly maintaining a tight seal.

The mirror made by brass. Brass is strongest material for these products. It has also magnifying options. Mirror diameter is 17cm.

We outsource End connectors for gas spring struts and transmission rods. Standard: DIN 71802 / DIN 71803/ DIN 71805 Normal Supply M6,M8,M10 ball joints, and custom order for M5,M12. Inner locking ring type & Outer Circlips types are available. Welcome contact us for discuss it, we can offer very competitive price.

Angled Ball Joints - China Competitive Supplier Standards:DIN 71802 DIN 71805 Material: Steel or 1.4305 stainless steel. Stainless steel versions have Neoprene seals. Version: Trivalent passivated. Stainless steel version bright. Note: Protected against dust, dirt, water spray and vapour. Applicable temperature range from -30 °C to +110 °C. On request: Axial joints with greater extraction force and left-hand thread available.

Ball Seats For Angle Joints Item: Ball Seats Standard: Din 71805 Material: Carbon Steel / Stainless Steel 304 / 316 Technics: Cold Forging Then CNC Turning, Drilling Finished by : Zinc plated, Nickel Plated, Blackened Available Application: Gaslift, Pneumatic & Hydraulic Cylinder End Joints China Pneumatic & Hydraulic Cylinder End Joints Source Factory Produce DIN71805 Ball Seats For Angle Joints With High Quality & Low Price. We are very glad to receive your inquiry.

Metal Ball Sockets Item: Metal Ball Socket Standard: Customized according to customer’s drawing Material: Carbon Steel Q235 / Stainless Steel 304 / 316 Technics: Cold Forging Then CNC Turning, Drilling Finished by : Black zinc plated, Blackened Application: Gas Springs, Pneumatic & Hydraulic Damper Struts End Joints China Pneumatic & Hydraulic Cylinder End Joints Source Factory Custom Produce Metal Ball Sockets With High Quality & Low Price. We are very glad to receive your inquiry.

Materials: Galvanized Carbon Steel, Stainless Steel 304, 316 Manufacturing Process: CNC Machining, Cold Forging Cold forging just supply thickness 10 / widith 18 sales@mxmparts.com WhatsApp: +86 13780014913

Clevis Joints Din 71752 Materials: Carbon Steel Q235 or same grade free cutting steel Y15, Stainless Steel 304, 316 Finish: whre or yellow zinc plated, nickel plated. Stanard Clevis Joints are CNC machined Larger volume can be cold forged China source of Clevis Joints sales@mxmparts.com WhatsApp: +86 13780014913

Product specifics: Stainless steel Pelham bit, with hooks&curb chain. Jointed mouth with SS&copper rollers. Cheek length:5" Mouth thickness:13MM Mouth size:5"

Product specifics: Stainless steel breaking bit, Copper corkscrew jointed mouth, Stainless steel turn cheeks, Mouth size:5", Mouth thickness:13MM, Cheek length:6"

Product specifics: Stainless steel Pelham bit, not rusted with hooks&curb chain. Solid jointed mouth Cheek length:5", Mouth thickness:17 to 18 MM

Joint tape at plasterboard joints used with. It makes the application surface smooth. It does not crack in the joints. It has high adhesion. It is economical.

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.