Lifts and elevators - Import export

ELEVATOR | LIFT LANDING DOOR MECHANISM 3 Panel Telescopic Landing Door - M3 EN 81-20/50 Norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W : 800 - 2000mm H : 2000-3500mm

Specially designed for lifting cars The PEGASOS garage car lift is a perfect solution for construction projects with limited space. It was specifically designed for lifting and lowering of cars and is based on a sophisticated design and a series of convenient features. It has the appearance of a garage and is the ideal alternative to a conventional ramp. The car lift brings vehicle and occupant automatically to the garage or parking deck. The PEGASOS can be mounted directly on the floor and therefore requires no pit. The platform can be equipped with a comfortable cabin or just a simple railing. Due to its compact design and the elimination of the machine room, it is easy to plan. The lifting function is realized by using a very silent and efficient electric motor. The transport of persons in the car is available upon request.

Space-saving parking of one or two cars Park the car on the platform and let it magically disappear in a pit The car scissor lift VERTICAR from Lödige is a perfect solution for parking one or two cars in a very confined space. A significant advantage of VERTICAR is minimum space requirement. This is successfully achieved through the integration of the machine into a pit. Thanks to an overhead canopy, a flat and even surface is provided and the lifting table, i.e. the parking position is fully covered. As a result a vehicle is parked in a pit and the overhead surface remains completely intact. Furthermore, as it requires a low installation height, a classic shaft is not necessary. Benefits of the car scissor lift Saves on construction space as a ramp is not required Creates two car parking spaces in even the tightest locations Safe operation with fingertip control Bio-oil used to protect the environment

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs

The slave pallet mover is an electrically operated floor conveyor for transporting slave pallets. It is powered by a battery and has a lifting unit for elevating pallets. Three forks ensure the ULDs are transferred safely. This means slave pallets can be moved throughout the building quickly and easily. Flexible transshipment of slave pallets Flexible organization of build and break positions IATA-compliant handling of ULDs Careful ULD handling

The elevator emergency stop device is a device that automatically operates and safely stops the elevator when an emergency occurs inside or outside the elevator. This device is an essential part to protect the safety of life and property, and is one of the devices that must be installed compulsorily in the elevator safety regulations. Generally, the elevator emergency stop device is attached to the elevator cable, and operates on the principle of automatically stopping the elevator by detecting when the cable moves at a rapid speed. This is controlled by a control device installed inside the elevator, which stops the elevator and opens the door to allow passengers to escape. Donggwang Sau provides safe and reliable elevator emergency stop devices using the latest technology and equipment, contributing to the safety and development of the elevator industry.

We can create mobile platforms on request. Discuss your mobile platform requirements with us. For mobile platforms we generally use GRP construction profiles manufactured in accordance with EN 13706 / E23. This ensures that the platform has a minimum loadbearing capacity. These GRP construction profiles typically have an isopolyester resin matrix. For structures that are exposed to higher chemical stress, we can also use profiles with a vinyl ester resin matrix. If profiles need to be connected with angle brackets, we generally use V4A stainless steel connectors. We do not use short GRP remnants for such connections because they are not sturdy enough.

MMANUAL LIFTER FOR PALLETS MOD. FPSDJ 1500 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The model FP SDJ 1500 is equipped with double chain for lifting. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451

Our load elevators, also known as material lifters (manual, electrical, pneumatic, hydraulic), will allow you to lift various loads (blinds, external air conditioning units, pergolas, engine blocks, etc.). Our manual range is available with the following specifications: -WLL 85kg, Height: 1.7-3.3m -WLL 100kg, Height: 1.65-4m -WLL 125kg, Height: 1.35-3.5m -WLL 125kg, Height: 1.45-4.56m -WLL 125kg, Height: 1.32-3.94m -WLL 150kg, Height: 1.53-4.5m -WLL 250kg, Height: 1.75-5.2m -WLL 280kg, Height: 1.75-5.2m Made in the EU Our electric range is available with the following specifications: -WLL 120kg, Max Height: 3.57m -WLL 90kg, Max Height: 4.87m Our pneumatic range is available with the following specifications: -WLL 136kg, Max Height: 3.8m -WLL 113kg, Max Height: 5.6m Our hydraulic range is available with the following specifications: -WLL 1500 kg, Height: 1-2.02m Made in France

We almost have all the process in house, including machining(cnc milling,cnc turning, grinding), sheet metal fabrication(laser cutting, stamping, deep draw, bending, tube bending, welding). So Tower can make finished products, assembly parts like elevator parts in house, which can have better price and better control on quality also.

There are different variations in the basic design of linear actuators such as ball screw actuators, worm drive actuators, acme screw actuators, tubular linear actuators, and linear slide actuators.Compact linear actuator has the most performance for these actuators

We almost have all the process in house, including machining(cnc milling, cnc turning, grinding), sheet metal fabrication(laser cutting, stamping, deep draw, bending, tube bending, welding). Please feel free to send us your inquiry.

Elevate every journey into an experience with our wood-clad elevator cabin, which brings the warmth and aesthetics of nature into your modern living. This unique design seamlessly combines functionality and elegance, transforming your elevator into more than just a means of transportation. Natural aesthetics: The wood cladding replicates the warmth and texture of real wood, adding a touch of natural elegance to your space. Customizable styles: Choose from different wood types and color options to perfectly tailor the elevator cabin design to your space. Durability and safety: The wood-clad elevator cabin is supported by a robust steel framework and designed to meet safety standards. User-friendly controls: A modern and intuitive user interface makes using the elevator a breeze. Environmentally friendly materials: The wood cladding is crafted from eco-friendly materials, ensuring a sustainable touch to your space

These are now required in both the pit area and on the top of car, both readable from the landing, indicating the permitted number of persons and the type of posture considered for the refuge space accommodation Manufactured from Aluminum or Magnet Pre-drilled fixing holes for quick and easy fixing Dimensions: 300 x 200mm (H x W)

Light and heavy duty slip resistant safe space rigid mats. Suitable for pit floor and top of car. Slip resistant Compliant with the requirements of EN81-20 3 sizes to suit various areas Material Magnet Fireproof Mat Aluminum In sizes you want

2 Panel Telescopic Landing Door - M2 EN 81-20/50 norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W :650 - 1300mm H : 2000-2500mm

ELEVATOR | LIFT LANDING DOOR MECHANISM 4 Panel Central Landing Door - M4 EN 81-20/50 norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W : 800 - 3500mm H : 2000-3500mm FRAME GLASS PANEL W : 1000 - 1300mm H : 2000-2300mm

2 Panel Central Landing Door - M1 FRAMED GLASS PANEL / FULL GLASS PANEL EN 81-20/50 norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W :650 - 1300mm H : 2000-2500mm

Stylish Metallic Silver Engraves Black, tough and durable 1.6mm thick Approx 12cm W x 10cm H (4.7" x 3.9") Waterproof Acrylic EASY TO INSTALL - Strong 3M Adhesive Backing

0.25 Aluminum Standart size : 25 x 15 cm Standardgröße: 25 x 15 cm Produced in the sizes you want Production available in all languages

Static painted aluminium frame and motifs Brushed copper stainless surface UV printed lettering and shapes Can be produced in desired sizes

In Case Of Fire Do Not Use Lift | Lift Sign All signs have braille characters to meet ADA regulations. 1/8" thick injection-molded plastic. Double-sided mounting tape included.

Package Elevator It consists of a complete elevator to make it turnkey operational in the elevator shaft. Labor, assembly-installation, transportation and application project drawing for the municipality are not included. Reasons to Prefer Our Package Elevator Service Our expert staff offers the material to the service of our valued business partners by making a project suitable for the condition and intended use of the building. The elevator used in the correct package elevator selection shows high performance and provides efficiency suitable for the purpose.

The traction sheave hoist Gtrac admitted for the personal transport the costly scaffolding of a lift shaft is to be eliminated suitably. The lifting gear technology on the cabin roof is installed by tailormade adaptation, so that this can be used as a working platform. About an upper and lower pulley the resigning traction rope is led without ground touch and is free of soiling. As a safety barrier serves as a rule security brake belonging to lift. Security facilities like final disconnection, Overlooking and a supervision whether rope to end is, guarantees a reliable and sure function.

The explosive developing progress concerning technical equipment of buildings and arrangements, has contributed in last decades a lot to the reduction of the environmental impact, with at the same time rising comfort of utilisation. In parallel in addition the rising claims which refer to their servicing, care and maintenance arise steadily. A factor which is dependent particularly in the undeveloped outskirt area on economic solutions in the height access technology. While the rational care of the facade stood already of here as a function of practical height access technologys, today are required on wide level height access technologys which can also enclose assembly works and services with the accordingly higher charges and big work platform lengths with. Hence, transportable arrangements from goracon were conceived for individual application situations, under inclusion of an easy and quick change of location.