Seals and seal material - Import export

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Based on decades of experience, GMN has specialized in producing extremely high quality machine tool components. Through this strategy, GMN manufactures a wide range of standard non-contact seals and customized solutions. The frictionless, no-wear characteristics of GMN non-contact seals offer effective, economical and ecological solutions for modern applications in and outside of the machine tool industry. Thanks to the non-contact design of the inner and outer ring, GMN labyrinth seals guarantee completely frictionless operation and therefore offer a wide range of benefits for a whole host of applications and uses.

Ramirex - Plasticos de Agueda, Lda is a Portuguese company with 40 years of experience in the plastic injection field. We produce our products using our own moulds and exclusive items using our client's moulds. We offer a wide range of products, from furniture accessories (sofa feet, tailor made shutter doors, caps and heads), drawing and office material (set squares, rulers, protractors, letter trays, pen cups and magazine racks) and sealing material (holders and heads). We also manufacture technical parts for different areas (for exemple, for refrigeration equipment, electrical panels and different telecommunication devices), with design and development thay may be either internal or external, according to the requirements of each client. We are a specialized and dynamic technical team, that combines the experience in production of plastic injection parts.

Valveless structure suits high viscosity fluids! Various body materials, sizes and end configurations. Braided hose connection types are newly added. Valveless construction drastically saves pressure loss and achieves high flow rate. Suitable for high viscosity fluids (such as grease). Available in various standard body materials, sizes and end configurations to cope with diversified applications and operating situations. See the pages of Seal Material Selection Table at the end of this catalog for the suitability of seal materials to fluids.

PEEK Seal Material Our PEEK pipe sealing elements redefine reliability for valve seat inserts. Crafted from high-grade PEEK material, these inserts offer exceptional resistance to temperature variations, chemicals, and pressure, ensuring leak-free and durable sealing solutions for your valves.

PEEK Sealing Plastic Introducing our 6-Inch PEEK Seal, the epitome of sealing excellence. Engineered for demanding applications, it offers unparalleled reliability, durability, and chemical resistance. Whether you need a custom-tailored solution or a dependable sealing option, our 6-inch PEEK Seal ensures low maintenance, high performance, and peace of mind. Elevate your sealing capabilities today.

PEEK Seal Material When reliability is non-negotiable, turn to PEEK (Polyether Ether Ketone) Seal Material. Engineered for excellence, PEEK seals combine exceptional durability, chemical resistance, and precision sealing. With a proven track record in demanding industries like chemicals, pharmaceuticals, and more, PEEK Seal Material ensures leak-free, long-lasting sealing solutions. Customizable to fit your unique applications, it minimizes maintenance costs and downtime, elevating the efficiency and reliability of your systems. Trust in PEEK Seal Material for sealing solutions that withstand the test of time.

Sealer machine designed for sealing of packaging of any size in the barrier material (polypropylene, paper and aluminum). Thanks to the small size and limited weight can be used in any place. The clamp sealing double hot bar is available with width mm. 200, mm. 300 and mm. 400 and the welds are repeatable, side by side, regardless of length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C by a temperature controller positioned on the caliper.

PEEK DN Seating Introducing our range of PEEK seat inserts, meticulously designed to meet the diverse needs of industrial valves. From the compact DN50 to the robust DN700, these inserts ensure superior sealing performance and longevity. Crafted with precision engineering, each size guarantees optimal functionality in various applications. Choose reliability and durability across the spectrum with our DN50 to DN700 PEEK seat inserts, setting a new standard for valve efficiency. Size: DN50, DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400, DN500, DN600, DN700.

ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

The ME-FD double Impulse sealers with pedestal incorporate twin elements (top and bottom) for heavy-duty applications and can accommodate up to 0.5mm material. Makes a 5 mm wide seal and fuses the material from both sides. Ideal for sealing large heavy bags. Also equipped with slide switch to select single side sealing or double sides sealing. By having a foot control, the hands are free to feed the machine. Units come complete with pedestal, stand, adjustable working plan and adjustable foot control. The sealing time is adjustable with a timer and is indicated by a light. Easy and simple to operate. No pre-heating required. Maximum seal thickness 0,25 mm. (0,50 mm total).

Dual heat multipurpose. Hand held constant heat sealer. Ideal for sealing clam shells or for tacking. Supplied with a high and low temperature control switch and proportional temperature control system. To spot seal OPS, PSP, PVC, and EPS food container.

PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

PEEK Sealing Material Our 3-Inch PEEK Sealing Material is engineered to redefine sealing solutions. With exceptional sealing performance and unbeatable durability, it stands as the ideal choice for critical applications. Whether you're facing challenging chemical environments or need a custom-tailored solution, our PEEK sealing material delivers leak-proof results, reduced maintenance, and long-lasting dependability. Trust in the power of PEEK for sealing excellence.

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

 • THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfu

• THERMO-DK are used for the reliable regulation of air, superheated    steam and flue gas flows. The maximum permitted temperature may be,     depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively     use stainless steal alloys to make our THERMO-DK valves. Our      standard working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-DK valves are controlled manually, electrically or pneumatically.       All brands can be used for the drive.  • THERMO-DK valves are metallically sealed and function without     any additional sealing materials.  • The leakage rate is less than 1 % (based on the cross-section).     THERMO-DK valves are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house     production allows us to deal with virtually any customer requests.   • Due to systematic standardisation in detail and our long-term     experience, THERMO-DK valves are not prone to malfunctions.

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

High-quality technical labels pass on information, protect against counterfeiting and the risk of injury, accelerate processes and sometimes even serve multifunctional requirements. Förster Etiketten supports you with technical and functional labels and stickers to meet your labeling obligations, to reduce costs and to implement process-optimized and economically important documentation and certification requirements.

High-quality technical labels pass on information, protect against counterfeiting and the risk of injury, accelerate processes and sometimes even serve multifunctional requirements. Förster Etiketten supports you with technical and functional labels and stickers to meet your labeling obligations, to reduce costs and to implement process-optimized and economically important documentation and certification requirements.

High-quality technical labels pass on information, protect against counterfeiting and the risk of injury, accelerate processes and sometimes even serve multifunctional requirements. Förster Etiketten supports you with technical and functional labels and stickers to meet your labeling obligations, to reduce costs and to implement process-optimized and economically important documentation and certification requirements.

High-quality technical labels pass on information, protect against counterfeiting and the risk of injury, accelerate processes and sometimes even serve multifunctional requirements. Förster Etiketten supports you with technical and functional labels and stickers to meet your labeling obligations, to reduce costs and to implement process-optimized and economically important documentation and certification requirements.

Labels with variable data individually according to customer requirements If UL certification is required for your barcode labels, this is no problem for Förster Etiketten. We deliver in all formats from small series to large runs on rolls or sheets, or individual labels in the required coding: GS1 GTIN code Barcodes (EAN code or barcode label)Barcodes (EAN code or barcode label) 2D data matrix codes – content from a database Alphanumeric characters from a database Also with results logging on request Other variable data, such as the date of manufacture, can also be subsequently inscribed on the label material or on the laminate at the production site using thermal transfer printing, even in compliance with UL.