Wall units - Import export

WALL UNIT

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Firm hold in any position Demag DBM battery magnets are the ideal solution wherever you need to transport magnetisable loads safely and efficiently. They can be used independently of a power supply and are therefore highly versatile. Whether used as stationary units with wall or slewing jib cranes or as mobile equipment with cranes or forklift trucks, Demag DBM battery magnets allow you to transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit) -Single metal sheets or plates can be separated from the load by flicking the toggle switch -High load capacities

Each of our Birch Plywood Kitchen Wall Cabinets is precision cut on our CNC nesting router. This ensures each of our cabinets is perfectly square and allows allows us to include rebated corner joints and rebates for back panels. This provides an added detail to the front face/edge and helps towards exceptional rigidity. Our cabinets are supplied fully assembled with a glued and screwed construction and feature a solid, 18mm thick, back panel, each adding to the superior strength, and overall rigidity of our cabinets. This method also avoids the use of any unsightly, “cam and dowel fixings often seen in in cheap. high volume carcass production. To ensure our high quality, Birch Plywood Wall Cabinets are the best they can be, the internal face of each panel is lightly sanded and the visible, forward facing edges are sanded to silky smooth finish, ready for lacquering.

Common wall sound insulation means soundproofing a common wall between two independent units in a way that prevents the passage of noise. These types of units are often found in multiple units such as apartments, offices, hotel rooms, and other multiple residential or commercial structures. Common wall soundproofing is a process performed to reduce sound transfer between two units that share a common wall. This can be done by adding insulation materials to the space inside the wall or the air space inside the structure or by building a thicker wall

Single Wall: Perfect for outdoor meals. Available in 8 oz, 12 oz, and 16 oz. Customization with logo starting from 30000 units. Double Wall: Ideal for hot dishes. Thermal insulation. Customization starting from 1000 units. Why choose us? Environmental respect. Durability and robustness. Simplified ordering process.

The swap body 7,457,82m is lightweight and grants a better thermal insulation when compared with steel walls units. The main structure in high tensile steel is solid and durable on the long terms. This equipment is available with various fittings such as – adjustable or fixed position support legs – internal provisions for different types of cargo – custom dimensions for oversize cargo – roller shutter door – steel roof It is possible to provide customized unit on demand.

HRUWALL is a singleroom decentralized heat recovery unit for concealed installation. The unit comes with a ceramic heat exchanger which boasts a maximum heat recovery ratio of 90% (the nominal heat recovery ratio is η=74.3% as per EN 1314182011). The energyefficient EC fan changes the running direction every 70 seconds to alternate between air supply and air exhaust. Low energy consumption and extremely low operating noise make this heat recovery unit a recommended solution for nonstop operation. The heat recovery unit has three speed levels to choose from, depending on the size of the area and indoor demands. HRUWALL10025 provides a sufficient air change level in areas up to 19m2. HRUWALL15060 provides a sufficient air change level in areas up to 45m2. We recommend installing the devices in pairs.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Thanks to the coupling of drinking fountains and cooling unit, several people can be supplied simultaneously. Semirecessed wall design. The installation of the cooling unit inside the wall requires no floor space. All elements manufactured from stainless steel top plates, front panels, internal chassis and cooling unit. Compact A316 stainless steel bubbler with nozzle guard. Antivandalism front push button and regulation of water height through exclusive high precision membrane valve. Deep rounded top plate with antisplash design. Removable lower ventilation panel for maintenance access. Recessed chassis to support the top plate, front panels and cooling unit. Easily regulated cold water temperature (thermostat) Possibility of emptying the cooling unit for greater hygiene. Furthermore the possibility to drink with cups or fill bottles for LV models. The installation of a purification filter is recommended for better water quality.

Useful cooling output 1,500 W. The cooling unit may be attached to the enclosure in 3 positions (external, partial internal and full internal mounting). The energy-efficient wall-mounted cooling unit Blue e+ Outdoor can be used worldwide, thanks to its multi-voltage capability, and is suitable for use with Toptec project solutions, for example Average 75% energy savings thanks to speed-regulated components and heat pipe technology Longer service life of the components inside the enclosure and the cooling unit due to component-friendly cooling Intuitive operation due to touch display and intelligent interfaces SK Blue e+ cooling unit, wall-mounted, outdoor, 1.6 kW, 110 – 240 V, 1~, 380 – 480 V, 3~, 50 – 60 Hz, aluminium, WHD: 400 x 950 x 310 mm

SUPERMARKET - HYPER MARKET DISPLAY SHELVING SYSTEMS Wall units designed to be used in grocery stores give you a stylish look of your supermarket while allowing you to do product diagnostics. You can choose the supermarket wall units according to shelving necessity. The standard height used on the market shelves is 220 cm. However, the height can depend on the area’s ceiling to be installed and this measure may vary with customer requests. The supermarket shelving Eco Wall unit usually comes with 40 cm base, upright, 30 cm top shelf, back panel, brackets, price tag and strip labels. Cream and white colors are generally chosen for market shelves while blue, red, yellow, orange and green colors are the most preferred on Storetech is a nationwide loading enterprise in prowiding storage solutions, from simple home shelving through efficient office filling, to heavy-duty industrial racking and mazzanine complex, Storetech always offer you with the best system among its full range products

Critical measuring tasks require specific density measuring instruments adapted to the individual requirements of our customers. For this purpose we offer tailor-made solutions according to the varying needs of our customers. Technical specifications • models approved for fiscal metering • high pressure models • high temperature models (up to 210 °C) • high precision models meeting specific customer requirements • models whose electronic components may be mounted separately (e.g. for mounting on walls or pipes) • density measuring units with protective housing • special models with flow rate up to 100 l/m (higher flow rate on request) Density measuring unit built into a protective housing incorporating a sight glass optionally available with • pump • flow monitoring • connection to rinsing equipment • strainer • gas detector • heating • equipment for base or wall mounting Advantages • complete solution from one source

Seamless (seamless) pipe is produced and complies with GOST 8731; 8732; 8733; 8734 in our State and in neighboring countries and is in demand at production sites, construction of housing and non residential premises, mechanical engineering, car building, manufacturing of mechanical blanks, various kinds of metal structures and products. The seamless pipe is used for laying electrical wires, for transporting oil products, chemicals, in drilling rigs, refrigeration and traction units. Thick walled seamless round pipe is used for the production of workpieces obtained by the mechanical (turning) method and the defense industry of our country. Thick walled pipe can significantly save time and money for machining parts, while saving the cutting turning tool. Seamless profile pipes are designed for the production of metal structures with increased mechanical requirements and loads. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Virus Guard all in one wall mounted wipes dispenser unit allows you to place the refill bag in the unit. It comes with replaceable patented nozzle to simply replace in case of breakdown without having the need to replace the entire box. Simply open the door and place the refill bag in the dispenser and feed the first wipe from the center core through the nozzle on top. Then close and lock the unit.

To view and download the brochure please click on the left image. Hollow Blocks manufactured with a egglayer / block macking machine from Knauer Engineering Pumice Blocks manufactured with a egglayer / block making machine from Knauer Engineering Retaining wall units manufactured with a egglayer / block making machine from Knauer Engineering Curbstone manufactured with a egglayer / block making machine from Knauer Engineering Palisades manufactured with a egglayer / block making machine from Knauer Engineering

Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology.

To view and download the brochure please click on the left image. Tradition and Progress Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology. Around the world many of KNAUER egglayers / block making machines are in daily operation.

Turkeyraf factory offers you the best types of decorations for supermarket shelves, hypermarket shelves, shop shelves for clothes, shoes, gifts, toys, pharmacies shelves and different market shelves. Among all the Turkish products shelves factories producing supermarket shelves from Turkey and warehouse shelves from Turkey, the best quality and the best prices.we provide the best types of refrigerators and freezers for supermarkets, in addition to providing vegetable and fruit stands, accounting cashier and all display equipment for nuts, coffee and sweets

Product Features: • Moulded from a grey, glass reinforced polyester. Smooth finish. • Includes gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North America Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Impact rating of IK08 per IEC62262. • Lid contains self captivated stainless steel screws. • Gasket material is Mohogumi rubber (EDPM). Heat resistance 100-120°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

EC technology: New EC technology is a revolution in electronic drive technology. It enables precise adjustment to output requirements thanks to its continuously variable operation. Easy installation Drill 4 x, screw and KaCool W is already on the wall. It could hardly be easier to work with! And if the need is not known beforehand: now you know how easy it is to retrofit the KaCool W. Variety of variants The product range gives you freedom of choice: on-site or separate infra-red control, or a wide selection from the Kampmann control range Easy access All the components are compactly installed inside the unit and so are easily accessible. Discreet Elegant enough to notice - discreet enough not to stand out. Subtly creating the perfect climate.

TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future

TOP – Temperature-adjusted air TOP unit heaters – “TOP” in terms o f price and performance – largely meet the demand for economical and controllable air handling. TOP unit heaters are all-purpose units that can be installed on the wall or ceiling. Operating principle Air is drawn in through the sickle-blade silentlyoperating fan and is blown through the heat exchanger into the room. The models with large heat exchanger capacity are ideal for use with low water temperatures. Applications Buildings of all kinds, which are to be ideally heated and ventilated with centralised or decentralised control. Kampmann is completely modernising its unit heaters. As the market leader in this segment, we are responsibly taking a courageous step forwards and, from now on, will be relying systematically on EC technology to power and control our units. There are good reasons for this: — No wasted power — Continuously variable control — Minimum noise levels — ErP-compliant future

TOP C - for the first rays of summer — bring cool air into your warehouse on hot days with the TOP C — offer cooling as an option, even when your client only asks for hall heating — up to now a project-specific solution – the all-rounder now becomes a standard product Multifunctional The demand for cooling buildings is also continuing to increase in industrial climate control. In the system with chiller/heat pumps, the TOP C offers a simple solution for both: removing heating or cooling loads. Continuously variable control Control of TOP C is continuously variable with the cost-effective EC fans to supply the precise output actually required. This also means unnecessary sound emissions are avoided. Fast-reacting The most flexible climate control solution for storage, production, and sales. The fan support ensures fast-reacting heating and cooling of the hall.

Ideal if the board needs to be moved throughout the day from location to location or to be locked in a safe overnight The Keytracker key drop box can be mounted to the wall The horizontal unit is designed to stand alone as a secure post box The medium chute is suitable for walls between 185mm and 300mm thick This will accept items measuring up to 130mm x 50mm x 40mm The faceplate measures 224mm (W) x 160mm (H) and is angled at 45 degrees The drop box which is attached to the chute above is fitted on the inside of the wall/building and the dimensions are 445mm (H) x 205mm (W) x 185mm (D). This is 1.2mm thick steel and has heavy-duty hinges.