Wash tanks - Import export

Quick and easy tightening system. Hydraulic lift for easy positioning of heavy cylinder heads.Heat insulated stainless steel. tank

The valve grinder is breaking new ground in valve grinding. Instead of the traditional colletor chuck/lock assembly, the "DoubleV" working system gives very sharp and precise results and is extremely easy touse.The unique valve locking system is applicable to a wide variety of engines.

Stand; It should be able to operate without any problem in the ambient temperature range of 0°C to +60°C. In addition, there lated machine should operate without any problems in heavy humidity and dusty working conditions. The machine works with PLC screen system. The installed DPF for cleaning is first subjected to a clogging test. According to the result, the cleaning process is started with different washing and pressure parameters. Before and afte rwashing, a report is received and delivered to the customer. The machine, which is designed for all kinds of DPFs, has all kinds of apparatus. A platform system that moves up and down to compress special filters is provided as standard on the machine. Special bag, cartridge filters, liquid level controls are provided as standard in the machine and it works completely digitally.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

Washing Pistol / Gun for autopsy/ laboratory tables Washing gun with different water spray patterns to clean big surfaces, Laboratories, stainless steel furniture, tables etc. Widley used at the Autopsie, examination, pathology, veterinary medicine. •Flow volume is presettable •Spray pattern is in nitely adjustable from full to spray jet •Ergonomically formed soft-rubber handle with locking device for continuous spraying •Incl. cone for table or wall mount •Incl. water connection set with either ½“ or ¾”

Special for spinach.Machine comprised pre washing and washing tanks, pumps that allow for the creation of turbulent flows, some insect trap and propeller to make the leaves plunging in the turbulent bath. Recovery of the water in a settling tray at the outlet of the washer and filtering of the water with a wire rotating drum and its scraper in order to separate the waste. Circulation of water in a closed loop for low water consumption.

Washes most vegetables.Machine mainly made up of a washing tank, pumps that allow the creation of turbulent flows, a paddle turnstile to ensure the progression of floating vegetables and a lift belt. Recovery of water in a settling tank at the outlet of the washer and filtration of the water with a rotating wire drum and its scraper to separate the waste. Closed circuit water circulation for low water consumption. Depending on the products treated, a paddle turnstile can be replaced by an insect trap. As an option, a datura trap can be integrated into the washer.

WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank . chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank . chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electro stainless steel body in the alkaline structure at a concentration of 2-5 % in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor,the washing effect is sprayed on 3 different planes, from bottom to topand from the side.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electro stainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank. chemical water, each point of the dirty partis specially around contacted by nozzles. While the washing group used rotates around itself with a power fulmotor, the washing effect is sprayed on 3 different planes, from bottom to to pand from the side.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

Our PET bottle recycle machine line is designed to give great recycling solution for PET bottle recycle process. We provide different solutions according to our customers PET bottle recycle machine demand, such as different capacity, dirtiness level, hot washing or cold washing system or etc. So we design our PET bottle recycle machine according to our customer's market requirements. Our PET bottle washing line can be designed for high level dirty PET bottles, with or without bales, Hot-Wash or Cold-Wash and etc. PET Bottles Recylce Machine Line Main Units, – Conveyor – Bale Opening Machine – Helezon – Cap and Label Remover – Sorting Belt – Drum Tromel – Conveyor Belt – Crusher Machine – Screw Loaders – Hot Washing Unit – Friction Washer – Flotation Tanks – Drying Units – Big Bag Filling Unit Just contact with us for your PET bottle recycling machine research, we will provide the optimum solution.

Suitable for draining condensate or tank washing water. It can be mounted after the installation of the bench without creating encumbrances that can hinder movement. The siphon is equipped with a "fixing ring" for connecting it to the bench.

Suitable for draining condensate or tank washing water. It can be assembled after the installation of the bench without creating encumbrances that can hinder handling. For this purpose, the siphon is supplied complete with the tub element 200028 that is connected to the siphon by means of a bell gasket.

The machine is designed for cleaning and degreasing of machine parts and components. The components placed in the rotating basket, which can have a diameter of 800, 1000 or 1200 mm. By rotating of the basket the components are washed with washing solution. The machine can be with or without insulation, sensors for level-and temperature controls, mud sump or oil separator. The mud sump is welded to the machine’s corpus. The washing solution flows from the tank into the mud sump and catches the gross dirt. The purified solution flows from the mud sump in the tank. The oil separator designed for separation of the oil from the washing solution. The oil is separated as a surface layer, which is collected in a special bath and discharged out of the chamber. The skimmed fluid is returned to the tank. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- a

Article 216 Wash – Professional portable washbasin for hairdressers made of durable scratch-resistant plastic material Height-adjustable chromed metal stand with 4-race modular base Basin with fixed inclination Accessories Hand shower – 2mt Waste pipe with support – 10l Tank – Carrying bag Versions and Colors The basin is available in Black 216 Wash – 4-race plastic base and non-slip feet 216 Wash Tsc – 4-race plastic base with non-slip feet and 2mt Waste pipe with support 216 Wash Tsc Dc – 4-race plastic base non-slip feet 2mt Waste pipe with support and Hand Shower 216 Wash Tsc Sb – 4-race plastic base non-slip feet Waste pipe and Tank 216 Wash Tsc Dc Sb – 4-race plastic base non-slip feet Waste pipe Hand Shower and Tank Bases It can be equipped with a 3-race plastic base / a modular 4-race plastic base / a 5-race plastic base Dimensions Basin 38 x 52 X 16 cm – Base 57 cm in diameter – Adjustable height from 76 to 111 cm

Acid descaling agent for CIP tank cleaning P35 Washing and cleaning products (including products containing solvents) Powerful, concentrated acid descaling detergent for cleaning of rust, mineral deposits and equipment in the livestock farming industry. Dirt to be removed includes mineral deposits such as milk and egg stones, as well as proteins, dried films and oxides. Does not generate foam. Allows routine treatment of all types of incrustations in circuits, pasteurisers, tanks, tanks, containers and utensils used on farms and in the agricultural and livestock industry. Particularly suitable for CIP applications. Wide range of applications in the food industry for cleaning stainless steel equipment with mineral or protein-derived incrustations, etc. Removes all inorganic dirt and part of the organic dirt due to its high wetting power.

The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.

Shyira is the highest washing station in Rwanda. The temperate climate, high altitude and volcanic soil give the station a perfect microclimate for growing specialty coffee. As with all specialty coffee plantations, the harvesting phase is carried out only by hand. During this operation we try to make an initial qualitative selection of the coffee by removing the unripe or damaged cherries. Subsequently, the cherry undergoes an initial washing in tanks to remove any floating bodies, the aim is to make our coffee even cleaner. Once the parchment has been separated from the coffee bean, a final rinse is carried out. Once all the washing phases have been completed, the moment of drying arrives: first in an area dedicated to drying where a further quality control of the pulped beans is carried out. Once this check is completed, the beans are left to dry and turned regularly during the day.

TECHNICAL SPECIFICATIONS - Reference : 007067 - Cylindro-conical tank - Manhole - Washing ball - Total drain - Clear draught DIMENSIONS AND WEIGHT - Diameter: 1750 mm - Height: 5250 mm - Weight : 1250 kg

Selectable operation speeds - double-skinned construction - EasyClean filter system - removable anti-block wash and rinse arms - stainless-steel ‘blade’ technology rinse arms for the ultimate rinse coverage - moulded wash tank to prevent debris build-up and assist routine maintenance - boiler and wash tank temperature displays - simple, intuitive controls - self-draining wash pump for improve hygiene - insulated boiler - low water usage - pressurised rinse system - break tank

Double-skinned construction - economiser auto-start/stop - Selectable operation speeds - easyClean filter system - removable anti-block wash and rinse arms - stainless steel ‘blade’ technology rinse arms for the ultimate rinse coverage - moulded washtank to prevent debris build-up and assist routine maintenance 460mm loading height - boiler and wash tank temperature displays - simple, intuitive controls - self-draining wash pump for improved hygiene- low-volume wash tank - insulated boiler - low water usage pressurised rinse system - break tank - supplied with 2 plate, 1 cup and cutlery basket

Heavy-duty wash pump - superior integral peristaltic detergent and rinse aid dosing units - EasyClean dual filters - removable anti-block wash and rinse arms - hydro-dynamic basket slides - moulded wash tank to prevent debris build-up and assist maintenance - optional thermostop for guaranteed rinse temperatures - extra loading height - counter-balanced door - self-draining wash pump for improved hygiene - low-volume wash tank - double-skinned and insulated - stainless-steel cabinet and door - insulated boiler - low water usage - simple, intuitive controls

Selectable operation speeds - double-skinned stainless steel construction - removable anti-block lower, upper and lateral wash arms for the ultimate wash coverage - heavy-duty self-draining wash pumps for power and improved hygiene - economiser auto start/stop - EasyClean filter system - moulded wash tank with radial corners to prevent debris build-up and assist with routine maintenance - removable stainless-steel blade technology rinse arms for improved rinse power and coverage boiler and wash tank temperature displays - simple, intuitive controls - pressurised rinse system Insulated boilers - low water usage - double rinse zone - break tank panoramic, counterbalanced inspection doors for safe and easy maintenance access