Alarms and surveillance - systems and equipment - Import export

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The microwave linear sensors FMW-50 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-M500 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M500 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The microwave linear sensors FMW-300 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The microwave linear sensors FMW-200 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

The microwave linear sensors FMW-100 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

Marchandise-Pro offers you the installation of video surveillance equipment Do you want to follow what is happening in your premises without leaving your home? With our turnkey solutions, it is now possible! Benefiting from state-of-the-art equipment, we offer you offers that are both economical and efficient to best protect your business. Control your system in real time from anywhere using a simple internet connection. Discover our video surveillance pack including: Integrated motion detector Infrared camera recording 24/7 Optional high-tech monitor screen Voice dialer that alerts you by phone Internet doubt removal in less than 30 seconds Do not hesitate to contact us for more information !

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.