CRYLAS CRYSTAL LASER SYSTEMS GMBH

The DPSS-CW-DUV laser FQCW266-300 delivers an output power of 300 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 30 mW to 300 mW. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.

The DPSS-CW-DUV laser FQCW266-25 delivers an output power of 25 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 3 mW to 30 mW in 0.3 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA355-100 emits pulses with a pulse width of around 1 ns and 100 µJ pulse energy. The average output power is 100 mW in transverse single-mode operation at a wavelength of 355 nm and peak pulse powers of >80 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.

The DPSS-CW-DUV laser FQCW266-200 delivers an output power of 200 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers from 10 mW to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 20 mW to 220 mW in 2 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.