Germany
Manufacturer/ Producer
Germany
Batch, Fed-batch or continuous culcure for bacteria and suspention cells, low labor cost and easy to clean. completely automatically working controlled by WinEr.
Request for a quoteGermany
one mini stirring bioreactor with two working volumes (50/500 or 100/1000ml ) with full function for shear stress insensitive cells. completely automatically working controlled by WinEr System
Request for a quoteGermany
for gas-liquid-solid contact. For aerobic bioprocess . completely automatically working controlled by WinEr
Request for a quoteGermany
packed bed reactor, keeping problem fromhigh liquid pressure drop, clogging, channeling and bed compaction. completely automatically working controlled by WinEr
Request for a quoteMDX Biotechnik is a small, innovative company based in Germany. Our highly-motivated and experienced team designs, produces, develops and optimises agitation bioreactors, packed bed bioreactors and laboratory and peristaltic pumps. New and innovative products from MDX include a "MultiFerm" 12-fold cell culture reactor and a fluidised bed reactor for 3D cell cultures. The MultiFerm is a 12-fold packed bed bioreactor and is specially designed for parallel cultivation of adherent cells. Among other things, it can be used to cultivate primary cells and for the mass production of monoclonal antibodies. The idea underlying the production of this multiple packed bed bioreactors resulted from cooperation with the universities and other companies as part of the "BIOKATALYSE2021" project promoted by the Federal Ministry for Education and Research. The MDX 3D fluidised bed reactor was developed in cooperation with the Technical University of Hamburg. It was specially designed for use in the 3D cultivation of adherent cells. By calling on numerous different carrier materials, it can be used in a wide range of fields of medical technology and research, e.g. cultivating liver cells, chondrocytes or endothelial cells for transplants.
Manufacturer/ Producer
Industriestr. 2
37176 Nörten-Hardenberg - Germany
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteGermany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteGermany
Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design
Request for a quoteGermany
DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.