Glass - Import export

M720 chopped strand mat represents a compelling solution for deep draw and complex molding processes with highly filled resin systems. EASY HANDLING AND MOLDABILITY Optimized bonding and chop length mix bring high conformability and easy hand tearing for tailored shapes. PROCESS EFFICIENCY Fast wetting and quick air release maximize molding productivity. Excellent weight uniformity helps laminate consistent thickness. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M720 mat is designed for hand layup process with polyester, vinyl ester resin systems.

Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process FREEDOM OF DESIGN AND WHITE COLOR U527 product easily adapts to complex die shapes and preserves part white color. U528X1 product offers a great balance between softness, white color and good tensile strength requirements. PRODUCTIVITY AND HIGH PERFORMANCE U528 product is easy to splice and enables excellent processability. It provides very good mechanical and dielectrical properties to molded parts U529 product higher tensile strength fits the requirement for most challenging profiles and fast pultrusion process speed. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. Unifilo®500 Series mats are available with varying binder contents to match up with specific customer applications

9560 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically engineered to enhance roofing mat and shingle performance. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life of both the roofing mat and shingles, as compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. EXCELLENT MAT/SHINGLE PERFORMANCE Improved fiber dispersion and hot/wet tensile retention in mat for better cure of mat binders. This results in improved mat tensile and shingle tear strength properties.

M715 chopped strand mat represents a compelling solution in contact molding applications where quick wetting, rapid air release, good conformability and low resin consumption are desired. EASY HANDLING & MOLDABILITY Maximizes molding productivity by reducing the labor required to roll out product. Ease of handling and ability to conform rapidly to complex molds. HIGH PERFORMANCE Optimizes resin consumption resulting in higher glass content and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M715 is available in Mexico and Latin America. Additional weights and widths are available upon request by contacting your Owens Corning representative.

UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications. CHALLENGING APPLICATIONS Good drapability and highstretching provide ease of conformability and deformability to complex contours, while easy splicing and overlapping enable large and complex part design. IMPROVED SURFACE AESTHETICS The open mat structure enables a consistent resin distribution throughout the surface, providing a smooth appearance behind the gelcoat. Excellent panel clarity and translucency is provided by the use of glass material — no synthetic core or stitching. IMPROVED PERFORMANCES Continuous fibers provide high tensile and flexural performance to the final part. Lack of chemical binder provides improved smoke and fire resistance properties.

ME1960 multiend roving represents a versatile solution for a largesurface of SMC (Sheet Molding Compound) components that require a combination of efficient processing, high mechanical, and aesthetic properties. EFFICIENT PROCESSING Easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static for large and/or semistructural part molding. ENHANCED PERFORMANCE Better wetout allows higher glass loading (up to 65% according to a 2016 single customer data source) due to excellent wetthrough and impregnation. This can be leveraged to further enhance the mechanical strength and stiffness of the composite part in complex structures. IDEAL COLOR (WHITE) FOR PIGMENTED PARTS Desirable product flow within mold at low shrinkage delivers a resinrich whitecolor surface aspect with lowporosity which facilitates good pigmentation or painting of finished parts.

ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multiend roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions. EXCELLENT PROCESSABILITY Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding. OUTSTANDING MECHANICAL PROPERTIES Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. FIRE RESISTANT Compatible with phenolic resins used in fire resistance applications such as electric vehicles.

Product Selection Guide for glass dryuse chopped strands for Thermoplastic and Thermoset reinforcement. Combining performance & processing excellence Efficient fit for a wide range of PBT formulations Makes feeding & handling easy tasks Matches natural color applications General purpose use & versatility Strong performance in impact modified PA high performance compounds Excellent dry as molded (DAM) properties High hydrolysis resistance For impact modified PA high performance compounds Enabling metal substitution in exposed to glycol applications Smaller, hotter engines Meets European Food Contact Regulation 10/2011 Up to +26% improved impact strength Potential alternatives to engineered materials (GF PA & LFTPP) Enabling PP compound optimization *Numbers and data generated at Owens Corning laboratory, Chambéry. Actual results may vary depending on equipment and material used.

Introducing higher performance composites by Owens Corning more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign. Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost. Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products. The glass can be used in high temperature muffler applications due to an annealing point increase of 25 30°C compared to current products. Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved. Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable. Reduce the weight of parts for automotive applications by up to 9%.

SE1200 singleend Type 30™ roving is a compelling solution designed specifically for knitting and weaving with versatility to work well in filament winding, pultrusion, and LFTP applications. EXCELLENT PROCESSING Smooth runout from lower drag across contact points produces less fuzz, resulting in smoother parts, less cleanup, and improved machine efficiencies. MULTIPROCESS & MULTIRESIN COMPATIBLE Flexibility for use with standard weaving looms, multiaxial knitting machines, filament winding, and pultrusion. FAST WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading and good adhesion, resulting in optimized part production speed which supports increased productivity and betterquality finished parts. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass provides longer service life in applications facing corrosion and possesses high fatigue properties to help qualify for wind energy.

SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field.

SE4121 singleend Type 30™ roving represents a compelling solution for Polypropylene Long Fiber Thermoplastics (LFTG and DLFT) applications where excellent mechanical properties and hydrolysis resistance are required. COMPOUNDING LINE EFFICIENCY No catenary and high resistance to fuzz generation equate to low cleanup & high machine efficiencies. MULTIPROCESS COMPATIBLE Suitable for all DLFT and LFTG processes and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties and hydrolysis resistance. EXCELLENT IMPREGNATION & DISPERSION Both DLFT and LFTG processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, extends service life compared to standard Eglass.

SE4805 singleend Type 30™ roving is specifically designed as a compelling solution for Compounders seeking increased productivity through improved processing and handling characteristics, and excellent compatibility in Polypropylene LFT applications. IMPROVED MANUFACTURING ECONOMICS Dependable internal and external unwinding process for less downtime. Reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for cleanup. MULTIPROCESS COMPATIBLE Suitable for LFTG, DLFT and CFRT processes, pellet manufacturing and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties. EXCELLENT IMPREGNATION & DISPERSION All processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass.

9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.

CS1530 Wet Used Chopped glass fiber represents a compelling reinforcement solution through optimizing the wallboard manufacturing process while increasing product performance.STRENGTH Improves flexural strength by +28% and shear strength by +13% vs. unreinforced wallboard. FIRE SAFETY Meets UL 263 and CAN/ULC S101 standards for fire endurance testing. Stable fiber dosage performance in customer vibratory feed systems, leading to improved consistency of fiber content in wallboard. 66% reduced drift in target fiber feed rate over time 50% reduction in fiber feed rate variability over time. (Illustration Improved Stability and Reduced Variability in Fiber Dosage Rate.) The product helps with reduced line downtime, reduced scrap rate and reduced fiber feed maintenance. (Illustration Reduced Fiber Buildup in Vibratory Feed Systems.)

790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.

VL9202 is composed of chopped filaments of Advantex® glass fiber, 16 microns in diameter, that are bonded together with a styrene insoluble binder system designed for pultrusion processes. Corrosion resistance, longterm durability with Advantex® ECR glass. Easy resin wetout. Highquality, uniform surface layer. Enhanced part structural strength. High flexibility for complex die processing.

ME1975 multiend roving represents a proven solution for sheet molding compound applications where efficient processing and superior surface finishes are required in vertical wall and low density ClassA parts. EXCELLENT PROCESSABILITY Easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static allows for high line speeds and thick paste viscosity. High impregnation and wetthrough characteristics in a relatively dense sheet provides excellent resin flow, especially in long vertical walls that can result in less rework. IMPRESSIVE CLASSA SURFACE APPEARANCE Designed for use with lowdensity formulations enabling enhanced ClassA surface aesthetics without rippling. HIGH PERFORMANCE Excellent product flow in mold along with excellent wetthrough characteristics allow for excellent mechanical properties in the final part. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass.

OC Paneluxe™ multiend roving represents a compelling solution for panels where excellent translucency performance is required. Produced with patented Advantex® corrosion resistant ECR glass by Owens Corning and compatible with unsaturated polyester resins. EXCELLENT PROCESSING Designed for excellent processing at various line speeds, OC Paneluxe™ roving features easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static. With high impregnation and wetthrough characteristics, the product allows excellent resin flow in translucent applications. IMPRESSIVE AESTHETICS Excellent fiber distribution provides a homogeneous surface aspect with limited fiber prints, resulting in consistent thickness throughout the laminate. Absence of white fibers and fiber springback along with significant reduction of air entrapment ensures excellent translucency of laminates.

OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. INCREASED EFFICIENCY Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time. REDUCED COST Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. GREAT PERFORMANCE Good mechanical properties, great surface quality, excellent conformability, doesn't trap air, low spring back. FAST WETOUT Designed to provide optimal performance for sprayup applications where fast wetout speed is preferred; great performance in various types of part complexities. Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.

U801/U809 continuous filament mats represent specific solutions to homogeneously reinforce expanded polyurethane foam. CUSTOMIZED FOR P U FOAM PROCESS U801/U809 specific design helps to even mat expansion during the PU foaming process. U809 is compatible with CO2 blowing agent used in insulating material manufacturing process. Excellent glass/polyurethane bonding brings improved mechanical performance and dimensional stability to the PU foam. U801 superior drapability fits the most complex mold shapes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U801/U809 mats are compatible with polyurethane resin systems and designed for PU foam reinforcement process. U809 is suited for LNG (Liquified Natural Gas) carrier cryogenic insulating systems. U801 is recommended for PU foam reinforcement in replacement of wood structure, in housing and recreational vehicle applications.

UNIFILO® 800 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of various composite parts by closed mold process. EFFICIENT PROCESSING U850 high permeability product family enables enhanced resin flow in highly filled systems. U810 product family offers a good compromise between low, medium and high drapability and permeability. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U800 products are available with varying strand design and binder contents to match up with specific customer applications. U800 Series mats are compatible with unsaturated polyester, vinyl ester, acrylic and epoxy resins. They are designed to be processed in closed mold processes including RTM (high and lowpressure injection), infusion and compression molding. Applications include heavy truck, automotive and industrial parts.

UNIFILO® 700 Series continuous filament mats represent a large choice of tailored preforming solutions for closed mold process. EASY PROCESSING S744, S750 products enable extra stretch and good resin flow for deeper draw applications. U746 product provides good stretch and excellent resin flow required in multilayer applications. ENHANCED MECHANICAL PROPERTIES T750, T754 products provide enhanced mechanical properties in the crossmat direction. U720 product provides stronger and more durable preforms. It is well suited for automated processes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U700 products are available with varying filament layout and binder contents to match up with specific customer applications.

QUALITY DESIGNED TO INCREASE PRODUCTIVITY M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Very good glass bonding provides excellent dry handling characteristics and minimized fiber shedding during molding process. HIGH PROCESS EFFICIENCY Fast wetting and quick air release help reducing the labor required to roll out the part. Exceptional wet tensile strength perfectly fits wet and carrying process. HIGH PERFORMANCE Optimized product design allows good surface finish and smooth surface behind gelcoat while providing the final part with exceptional tensile and flexural performances. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion.

M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools.

M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Optimized chop length mix provides superior dry tensile strength while bringing good conformability to contoured molds. HIGH PROCESS EFFICIENCY Fast wetthrough and low resin pickup combined with excellent handling properties in dry and wet conditions. This makes the product an ideal choice for large and thick parts production with dry and wetcarrying process. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. HAND LAY UP CLOSED MOLDS M6X1 mat is designed for use with polyester, vinyl ester resin systems inhand layup or closed mold applications including automotive parts, boats, chemical tanks and pools. (Picture copyright nostal6ie, shutterstock.com. For application illustration only.)